Module for working with petrol, electric, and diesel vehicles with Denso SH72xxx CAN control units.
Operation is performed by connecting on the bench via the CAN bus. ECU removal is necessary for direct connection, no opening is required!
Which vehicles and control units does the Bitbox Denso SH72xxx CAN module support:
FIDs: 142, 143, 305, 306, 307, 308, 309, 310, 311, 312, 313, 314, 315, 316, 349, 353, 355, 356, 359, 361, 370
- FAW Denso Petrol SH72530 1.25Mb BENCH-CAN (FID: 311)
- Hino Denso Diesel SH72543 2.0Mb BENCH-CAN (FID: 361)
- Honda Denso TCM SH72544 2.5Mb BENCH-CAN (FID: 469)
- Isuzu Denso Diesel SH72546 3.75Mb BENCH-CAN (FID: 315)
- Kia/Hyundai Denso Diesel SH72543 2.0Mb BENCH-CAN (FID: 359)
- Kia/Hyundai Denso Diesel SH72546 3.75Mb BENCH-CAN (FID: 312)
- Kia/Hyundai Denso Petrol SH72530 1.25Mb BENCH-CAN (FID: 370)
- Kubota Denso ACU SH72531 1.25Mb BENCH-CAN (FID: 356)
- Kubota Denso Diesel SH72543 2.0Mb BENCH-CAN (FID: 355)
- Mazda Denso Diesel SH72543 2.0Mb BENCH-CAN (FID: 306)
- Mazda Denso Diesel SH72546 3.75Mb BENCH-CAN (FID: 305)
- Mazda Denso Petrol SH72531 1.25Mb BENCH-CAN (FID: 316)
- Mazda Denso Petrol SH72543 2.0Mb BENCH-CAN (FID: 307)
- Mazda Denso TCM SH72531 1.25Mb BENCH-CAN (FID: 349)
- Mitsubishi Denso Diesel SH72543 2.0Mb BENCH-CAN (FID: 314)
- Nissan Denso Electro SH72531 1.25Mb BENCH-CAN (FID: 310)
- Subaru Denso Diesel SH72543 2.0Mb BENCH-CAN (FID: 353)
- Subaru Denso Petrol SH72531 1.25Mb BENCH-CAN (FID: 308)
- Suzuki Denso Petrol SH72530 1.25Mb BENCH-CAN (FID: 309)
- Toyota/Daihatsu Denso Petrol SH72531 1.25Mb BENCH-CAN (FID: 313)
- Volvo Denso SH72543 2Mb BENCH-CAN (FID: 143)
- Volvo Denso SH72546 3.75Mb BENCH-CAN (FID: 142)
Reading and writing of FullFlash are supported, with checksum correction during writing.
The module requires the purchase of USB dongle for protection Bitbox. The dongle can be purchased from our store. An unlimited number of modules can be activated on one dongle.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the dongle's serial number and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More information about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.