Module for virtual reading and writing through the diagnostic connector and on the table via the CAN bus of Transtron control units installed on Isuzu diesel vehicles. Blocks based on Aurix processors are supported.
Attention! Some car configurations have a gateway that does not allow writing through the diagnostic connector. In this case, use the table connection to complete the recording.
Which cars and control units does the Bitbox Isuzu Transtron Aurix module support:
FIDs: 281, 284, 504
Isuzu Transtron EURO4 TC265D CAN (FID:281)
Isuzu Transtron EURO5 TC277T+TC265D CAN (FID:284)
Allows Identification, Virtual reading, Writing and CS correction.
Isuzu Transtron EURO5 TC275T CAN (FID:504)
Allows Identification, Real Reading (1-2 hours), Virtual reading (if file available on our server), Writing and CS correction. Also it provides an option for installing protection from Real Reading.
Attention! Some vehicles with gateway do not allow writing with OBD2, please use BENCH connection for writing to complete.
Supports identification, virtual reading, writing, and checksum correction.
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). More about J2534 here.
To connect the control unit on the table, additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference