Software module for working with Denso Gen1 CAN engine control units in Toyota vehicles.
The module is designed for virtual reading and writing through the CAN bus of Denso and Fujitsu Ten Gen1 control units installed in petrol and diesel Toyota/Lexus/Scion/Hino vehicles.
Which vehicles and control units does the Bitbox Toyota Denso Gen1 CAN module support:
FIDs: 24, 26
- Toyota Denso NEC 76F00XX (FID: 24)
- Toyota Denso NEC TCM 76F00XX (FID: 26)
The module supports working with Denso control units with CAN bus, based on NEC 76F0038, 76F0039, 76F0040, 76F0070, and 76F0085 processors.
The module allows:
- Identification of software version
- Virtual reading of the current or latest firmware version*
- Writing (both updates and downgrades)
- Checksum and CVN correction
- Recovery from any state**
* - The virtual reading mode can be selected in the Settings section.
** - This function allows for the recovery of control units that have been programmatically damaged by any flasher during CAN bus writing or updating with Techstream. It does not require any additional JTAG/NBD equipment and can be performed using a J2534 device via the CAN bus in boot mode. This allows for painless recovery of control units, including the LC200 4.5TD, without complex disassembly to access the reverse side of the board, as well as units without an NBD/JTAG port pad (such as Camry V50, Highlander 3.5 U50, etc.).
For module operation, the purchase of a Bitbox USB protection key is required.
Activation of modules is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and public holidays (up to 2 hours).
To activate the module, only the serial number of the key and email are required.
For OBD2 connection, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). Learn more about J2534 here.
To connect the control unit on the workbench, the purchase of additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.