
Software module for working with the engine control unit of Ford Focus 2/Fiesta/Fusion cars
To use the module, you need to purchase a USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
Which cars and control units is the 20 PCM FLASH module designed for:
- Ford Focus 2: 1.4L, 1.6L Duratec 85/100/115PS (SIM28/29)
- Ford Focus 2: 1.8L, 2.0L Duratec HE 125/145PS (ESU131/411/418)
- Ford Focus 2: 1.8L, 2.0L Duratorq Lynx/DW10C (SID202/SID206)
- Ford Focus 2 ST: 2.5L Duratec I5 225PS (ME9.0)
- Ford Fiesta/Fusion: 1.4L, 1.6L Duratec 85/100PS (SIM210)
Reading, writing, checksum verification.
- Ford Kuga 1: 2.5L Duratec I5 200PS (ME9.0)
Writing, checksum verification.
ATTENTION! This module supports automatic VID block transfer.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). You can buy J2534 adapter in our store.
To connect the control unit on the table, additional equipment is required, any of the following:
-
There are no reviews for this product.
-
No questions yet
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.