PCMflash 1.4.7 Update Released: New ECU Modules and Extended Bench Mode Capabilities
The latest PCMflash 1.4.7 update introduces new modules and expands functionality for working with engine control units (ECUs) and transmission control units (TCUs). The update focuses on enhanced bench mode operations, broader vehicle coverage, and improved checksum handling.
New Module 99: Service Mode for EMS 2.3 / 2.4 (Volvo / Renault Trucks)
A new Module 99 has been added, enabling service mode operation for EMS 2.3 and EMS 2.4 ECUs used in **Volvo Trucks and Renault Trucks vehicles.
- Bench mode operation with FLASH and EEPROM memory
- Full support for:
- Read / Write
- Checksum verification
- Checksum correction
This module is currently released as a test version.
- Volvo/Renault EMS 2.3/2.4 FLASH Bootloader [RD/WR/CS]
- Volvo/Renault EMS 2.3/2.4 EEPROM Bootloader [RD/WR]
New Module 100: Ford SID212 / SID212EVO ECU Support
Module 100 introduces support for SID212 and SID212EVO ECUs, installed in Ford 2.0L diesel vehicles.
- Operation via OBD (diagnostic connector) and bench mode
- Supported functions:
- Read / Write
- Checksum verification and correction
- Ford Transit: 2.0L diesel (SID212/SID212EVO) [RD/WR/CS]
- Ford Focus 4: 2.0L diesel (SID212/SID212EVO) [RD/WR/CS]
- Ford Kuga 3: 2.0L diesel (SID212/SID212EVO) [RD/WR/CS]
- Ford Mondeo 5: 2.0L diesel (SID212/SID212EVO) [RD/WR/CS]
Module 51 Improvements: Chinese Vehicle ECUs
Enhancements in Module 51 include improved support for:
- MT92.1 and MT95.1 ECUs used in GAC vehicles
- Added test support for MT62.3 ECUs used in Sharmax snowmobiles
Supported operations:
- Read / Write
- Checksum verification and correction (where applicable)
- Joylong 2.0L (Delphi MT62.1G) [RD/WR/CS]
- Sharmax (Delphi MT62.3) [Test] [RD/WR/CS]
Module 57 Update: SIMOS 8 / 10 / 11 / 12 / PCR2.1
Extended functionality for SIMOS and PCR2.1 ECUs:
- Bench mode access to FLASH and EEPROM without ECU opening
- Supported operations:
- Read / Write
- Unlock
- Checksum verification and correction
Hardware requirement: Scanmatik 2 Pro / Scanmatik 3 adapter
- PCR2.1 Bootloader (FLASH) [RD/WR/CS]
- PCR2.1 Bootloader (EEPROM/UNLOCK) [RD/WR/UNLOCK]
- SIMOS8.3/8.4/8.5/8.6 Bootloader (FLASH) [RD/WR/CS]
- SIMOS8.3/8.4/8.6 Bootloader (EEPROM/UNLOCK) [RD/WR/UNLOCK]
- SIMOS12.1/12.2 Bootloader (FLASH) [RD/WR/CS]
- SIMOS12.1/12.2 Bootloader (EEPROM) [RD/WR]
Module 58 Update: Temic Transmission Control Units (DQ500)
Added support for DQ500 DSG transmission ECUs (hardware 0BH / 0BT):
- Bench mode FLASH and EEPROM access
- Full support for:
- Read / Write
- Checksum verification and correction
- DQ500 0BH/0BT (FLASH) Bootloader [RD/WR/CS]
- DQ500 0BH/0BT (EEPROM) Bootloader [RD/WR]
Module 86 Update: Chinese Transmission ECUs
Expanded support for TCUs used in Chinese vehicles:
- ATDG-81-9.4 (BAW, JAC with A8R50 automatic transmission)
- ATDG-81-9.7 (Chery, Exeed, Jetour with 7DCT380 gearbox)
- TCU-C6 (SWM with 7DCT transmission)
- BAW A8R50 (ATDG-81-9.4) [VRD/RD/WR/CS]
- Chery/Exeed/Jetour 7DCT380 (ATDG-81-9.7) [VRD/RD/WR/CS]
- JAC A8R50 (ATDG-81-9.4) [VRD/RD/WR/CS]
- SWM 7DCT (TCU-C6) [RD/WR/NC]
All supported with:
- Read / Write
- Checksum verification and correction
Module 89 Update: MG1 ECUs (China Market)
- Added support for Denso ECUs used in Geely vehicles
- Features:
- Virtual read
- Write
- Checksum verification and correction
Note: Volvo platform is not supported. Virtual read is limited to the Chinese market.
- Geely 2.0T (Denso/0N50N) [VRD/WR/CS]
- F-150 2.3L Ecoboost China (MG1US008) [P3N9] [RD/WR/CS]
Module 97 Update: AECS / LinControl ECUs
- Added support for AECS ECU used in UAZ Patriot vehicles
- UAZ Patriot 2.7L (AECS) [RD/WR/CS]
Module 98 Update: Continental ECUs
- Added support for EasyU SDI ECUs used in Geely vehicles for the Chinese market
- Geely 1.0T (EasyU SDI) [RD/WR/CS]
Additional Improvements
- Various optimizations and stability improvements
- Enhanced compatibility across multiple ECU families
