Software module for working with the engine control unit of Kia/Hyundai diesel cars.
Module for reading and writing control units installed on Korean Kia/Hyundai diesel cars.
Which cars and control units does the Bitbox Kia/Hyundai Diesel module support:
FIDs: 37, 42, 41, 39
Kia/Hyundai Denso Diesel SH72546 (FID: 42)
The control unit operates on the basis of the Renesas SH72546 processor with internal flash memory of 3.75Mb.
Allows virtual reading and writing of FullFlash via CAN-bus with checksum correction. Recovery is possible from any state.
Supported cars:
Hyundai Grand Starex H-1 (TQ) 2.5 CRDI Euro6
Hyundai h450 (EU) 2.5 CRDI Euro6
Hyundai H100 Porter (HR) 2.5 CRDI Euro6
Kia Bongo/K2500 2.5 CRDI Euro6
Kia/Hyundai Delphi DCM6.2AP (FID: 41) - test
The unit is based on the NXP SPC5674 MCU processor with internal flash memory of 4Mb.
Allows reading and writing of calibration area via CAN-bus with checksum correction. Recovery is possible from any state.
Supported cars:
Hyundai i20 (GB) 1.1 CRDI Euro6
Kia Rio (UB) 1.1 CRDI Euro6
Kia/Hyundai Delphi DCM3.7AP (FID: 39)
The unit is based on the Renesas SH72513 processor with internal flash memory of 2Mb.
Allows reading of FullFlash and writing of calibration area via CAN-bus with checksum correction.
Supported cars:
Hyundai H-1 (TQ) 2.5 CRDi Euro4/5
Hyundai i20 (PB) 1.1 CRDi Euro5
Hyundai i20 (PB) 1.4 CRDi Euro4/5
Hyundai i30 (GD) 1.4 CRDi Euro5
Hyundai iX20 (JC) 1.4 CRDi Euro5
Hyundai H100/Porter (HR) 2.5 CRDi Euro5
Kia Rio (UB) 1.1 CRDi Euro5
Kia Rio (UB) 1.4 CRDi Euro5
Kia Cee'd (JD) 1.4 Euro5
Kia Venga (YN) 1.4 CRDi Euro5
Kia Bongo/K2500 (PU) 2.5 CRDI Euro5
Kia Delphi DCM3.2AP (FID: 37)
The control units are based on the Motorola MPC563 processor with external flash memory AM29BDD160GB with a total address space of 2.5MB.
FullFlash reading, writing via CAN-bus, checksum correction are available.
Supported cars:
Kia Bongo 2.9 CRDI Euro4
Kia Carnival 2.9 CRDI Euro4
Kia Sedona 2.9 CRDI Euro4
To work with the module, the purchase of a USB protection key Bitbox is required. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
The activation of modules is carried out within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). More about J2534 here.
To connect the control unit on the table, the purchase of additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference