Software module for working with the Bosch engine control unit of diesel vehicles of the FCA concern.
Module for reading and writing through the diagnostic connector of Chrysler / Dodge / Jeep diesel vehicles with Bosch control units.
Which vehicles and control units does the Bitbox FCA Bosch Diesel CAN module support:
FIDs: 106, 107, 108, 124
FCA Bosch EDC17C49 (FID: 106)
The control unit is based on the Infineon Tricore TC1797 processor with internal flash memory of 4.0Mb. It allows virtual reading and writing of calibration areas via CAN-bus with checksum correction.
FCA Bosch EDC17C79 (FID: 107)
The control unit is based on the Infineon Tricore TC1797 processor with internal flash memory of 4.0Mb. It allows virtual reading and writing of calibration areas via CAN-bus with checksum correction.
FCA Bosch EDC17CP27 (FID: 108) - TEST
The control unit is based on the Infineon Tricore TC1796 processor with internal flash memory of 2.0Mb. It allows virtual reading and writing of calibration areas via CAN-bus with checksum correction.
FCA Bosch EDC17C49/C79 Reader (FID: 124)
Allows reading of calibration areas on the bench via CAN-bus with checksum verification.
The module requires the purchase of a USB protection key Bitbox. You can buy the key in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More about J2534 here.
Additional equipment is required to connect the control unit on the bench, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.