Software module for working with Delphi engine control unit of Chinese petrol vehicles.
Module for reading and writing flash memory of Delphi engine control units for Chinese petrol vehicles.
Which vehicles and control units does the Bitbox China Delphi Petrol module support:
Delphi MT20U (FID: 51)
The Delphi MT20U engine control unit is based on the Motorola MC912DT128 processor with internal flash memory of 128 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT20U2 (FID: 59)
The Delphi MT20U2 engine control unit is based on the Motorola MC9S12KG256 processor with internal flash memory of 256 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT22.1 (FID: 52)
The Delphi MT22.1 engine control unit is based on the Motorola MC9S12XEP768 processor with internal flash memory of 768 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT22.1 IAC (FID: 158)
The Delphi MT22.1 engine control unit is based on the Motorola MC9S12XEQ512 processor with internal flash memory of 512 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT22U (FID: 53)
The Delphi MT22U engine control unit is based on the Motorola MC9S12XET256 processor with internal flash memory of 256 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT20UED (FID: 58)
The Delphi MT62.1 engine control unit is based on the Motorola MC9S12KG256 processor with internal flash memory of 256 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT22.1.1 HW1 (FID: 54)
The Delphi MT22.1.1 HW1 engine control unit is based on the Motorola MC9S12XET256 processor with internal flash memory of 256 KB. It supports reading full flash, writing calibration area via K-line, and checksum correction during writing.
Delphi MT34 (FID: 55) - test
The Delphi MT34 engine control unit is based on the Infineon Tricore processor with external flash memory AM29BL802CB with a capacity of 1 MB. It supports reading and writing of calibration area via K-line, but does not support checksum correction.
Delphi MT62.1 K-Line (FID: 56)
The Delphi MT62.1 engine control unit is based on the NXP SPC5634 processor with internal flash memory of 1.5 MB. It supports reading and writing of calibration area via K-line, but does not support checksum correction.
Delphi MT62.1 CAN (FID: 146)
The Delphi MT62.1 engine control unit is based on the NXP SPC5634 processor with internal flash memory of 1.5 MB. It supports reading and writing of calibration area via CAN bus, but does not support checksum correction.
Delphi MT80 K-line (FID: 61)
The Delphi MT80 engine control unit is based on the Infineon Tricore TC1762 processor with internal flash memory of 1.5 MB. It supports reading and writing of calibration area via K-line, including checksum correction.
Delphi MT92/MT92.1 (FID: 86)
The Delphi MT92/MT92.1 control unit is based on the Infineon Tricore TC17xx processor with an internal 2MB/2.5MB flash memory. Reading and writing of the calibration area via CAN bus is supported, correction of the KS is not supported.
Delphi MT95.1 Changan (FID: 455)
The Delphi/BorgWagner MT95.1 control unit is based on the Infineon Aurix TC367 processor with an internal 4MB flash memory. Reading and writing of the calibration area via CAN bus is supported, correction of the KS is not supported.
The Delphi MT92/MT92.1 engine control unit is based on the Infineon Tricore TC17xx processor with internal flash memory of 2 MB/2.5 MB. It supports reading and writing of calibration area via CAN bus, but does not support checksum correction.
The module requires the purchase of USB dongle for protection Bitbox. The dongle can be purchased from our store. An unlimited number of modules can be activated on one dongle.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the dongle's serial number and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More information about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.