Software module for working with the engine control unit Bosch EDC17CV41 trucks.
Module for reading and writing through the diagnostic connector via the CAN bus of the Bosch EDC17CV41 control units installed on Tata-Daewoo, New Holland, CASE, CLAAS, Iveco, Doosan trucks and special equipment.
The control unit is based on the Infineon Tricore TC1797 processor with internal memory of 4.0Mb.
Which vehicles and control units does the Bitbox Trucks/Industrial Bosch EDC17CV41 module support:
FIDs: 109, 110, 112, 113, 114, 115, 116, 119
- Iveco Bosch EDC17CV41 (FID: 110)
- Tata-Daewoo Bosch EDC17CV41 (FID: 112)
- CASE/New Holland Bosch EDC17CV41 (FID: 113)
- CLAAS Bosch EDC17CV41 (FID: 114)
- Doosan Bosch EDC17CV41 (FID: 115)
- Tigercat Bosch EDC17CV41 (FID: 116)
- Pi Makina Bosch EDC17CV41 (FID: 119)
- Ford Bosch EDC17CV41 (FID: 109)
- Hino Bosch EDC17CV41 (FID:147)
Attention! Some of the supported equipment models use a 24V power supply. Use J2534 adapters that support this voltage (e.g. Scanmatik 2 / 2 PRO) or connect the unit on the bench.
New types of control units will be added to the module as they become available.
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased with one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
The module activation requires ONLY the serial number of the key and email.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference