Software module for working with Delphi ETC3 engine control unit for trucks.
Module for reading and writing through the diagnostic connector via CAN bus of Delphi ETC3 control units installed on DAF, Tatra, Kenworth, Peterbilt, Hyundai trucks.
Which vehicles and control units does the Bitbox Trucks Delphi ETC3 module support:
FIDs: 220, 221
DAF/Industrial Delphi ETC3 (FID: 220)
The family supports working with Delphi ETC3 units based on NXP MPC5566 processor with 3MB internal memory.
Allows reading and writing calibration area through CAN bus. Checksum correction is done during writing.
Hyundai Delphi ETC3 (FID: 221)
The family supports working with Delphi ETC3 units based on NXP MPC5566 processor with 3MB internal memory.
Allows reading and writing calibration area through CAN bus. Checksum correction is done during writing.
Attention! Some of the equipment models supported by this module use 24V voltage in the onboard network. Use J2534 adapters that support this voltage (for example, Scanmatik 2 / 2 PRO) or connect the unit on the bench.
To use the module, you need to purchase a Bitbox USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the key and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). More about J2534 here.
To connect the control unit on the bench, additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.