![Toyota Denso Gen2 Reader BENCH [SM2 ONLY] BitBox](https://iobd.io/image/cache/catalog/products/bitbox/toyota-denso-gen2-reader-bench-iobd-100x100.png)
![Toyota Denso Gen2 Reader BENCH [SM2 ONLY] BitBox](https://iobd.io/image/cache/catalog/products/bitbox/toyota-denso-gen2-reader-bench-iobd-1000x1000.png)
Special service module for BENCH reading of the Toyota Denso Gen2 CAN ECUs.
Allows to do Software ID on the bench and REAL reading of the FullFlash by CANbus.
Works only with Scanmatik 2 Pro connected to ECU by any bench cable adapter with automatic power and Boot pin management.
Supported MCUs:
- D76F0199GD 1280Kb
- D76F0196F1 1536Kb
- D76F0198F1 1536Kb
- D76F0219F1 2048Kb
To use the module, the purchase of a Bitbox USB protection key is required. The key can be purchased in our store. You can buy an unlimited number of modules with one key.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the key and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More information about J2534 here.
To connect the control unit on the bench, additional equipment from the following list is required:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference