Software module for working with the engine control unit of Suzuki watercraft.
Module for working with Suzuki outboard motors based on Mitsubishi control units.
Which vehicles and control units does the Bitbox Suzuki Marine module support:
FID 198: Suzuki Marine Mitsubishi MH8104F K-Line
Allows identification, reading and writing of FullFlash via K-Line, checking and correcting checksums.
- Suzuki Marine DF9.9B/15A/20A
- Suzuki Marine DF25A/30A
- Suzuki Marine DF40A/50A/60A
- Suzuki Marine DF100A/115A/140A
Other types of control units and motors will be added as possible.
Attention! The module requires a voltage of +16V for programming. The voltage is taken from the 12th pin of the J2534 adapter or from an external power source. The J2534 adapter must support single-byte operations via K-Line and the installation of +16V on the 12th pin. Tested and works with OpenPort 2.0. DrewTech Mongoose, Scanmatik, Ford VCM2 do not work with this module.
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
To connect the control unit on the bench, the purchase of additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference