Software module for working with Siemens engine control unit of SsangYong petrol cars.
Module for working with Siemens engine control units in SsangYong petrol cars.
Which cars and control units are supported by Bitbox SsangYong Siemens Petrol module:
FIDs: 40, 45
Siemens SIM2K-410 (FID: 40)
The Siemens SIM2K-410 control unit is based on the NXP SPC5634 processor with 1.5 MB internal flash memory.
This control unit is used in SsangYong petrol cars with 1.6 G16DF engines. Virtual reading and writing of FullFlash through the diagnostic connector is supported, as well as checksum correction during writing.
Supported cars:
SsangYong Tivoli 1.6 G16DF
SsangYong Tivoli XLV 1.6 G16DF
Siemens SIM2K-C201 (FID: 45)
The Siemens SIM2K-C201 control unit is based on the Infineon Tricore TC1767 processor with 2.0 MB internal flash memory.
This control unit is used in SsangYong petrol cars with 2.0 G20DF engines. Reading and writing of FullFlash through the diagnostic connector is supported, as well as checksum correction during writing.
Supported cars:
SsangYong Korando/New Actyon 2.0 G20DF
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More about J2534 here.
Additional equipment is required to connect the control unit on the table, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.