Hurry to buy Promotion ends left
-
Discounts for module payments:
- 2–3 modules — extra 5% discount (use coupon BIT25_15)
- 4+ modules — extra 10% discount (use coupon BIT25_20)
- Carlist BitBox
Module for working with the CAN bus for control units of Peugeot and Citroen petrol cars.
Module for working through the diagnostic connector via the CAN bus with control units installed on Peugeot and Citroen petrol cars.
Which cars and control units does the Bitbox PSA Diesel CAN module support:
FIDs: 346, 347, 360, 364
PSA Valeo V46.11 (FID: 346)
The control unit is based on the Renesas SH72544 processor with internal flash memory of 2.5Mb. It allows reading and writing of calibration areas via CAN-bus with checksum correction.
PSA Valeo VD46.1 (FID: 347)
The control unit is based on the Renesas SH72546 processor with internal flash memory of 3.75Mb. It allows reading and writing of calibration areas via CAN-bus with checksum correction.
PSA Bosch MEV17.4 (FID: 360)
The control unit is based on the Tricore TC1766 processor with internal flash memory of 1.46Mb. It allows reading and writing via CAN-bus with checksum correction.
PSA Bosch MEV17.4.2 (FID: 364)
The control unit is based on the Tricore TC1767 processor with internal flash memory of 2.0Mb. It allows reading and writing via CAN-bus with checksum correction.
Other types of control units will be added as possible. The cost of the module may be changed in the future.
To work with the module, you need to purchase a USB protection key Bitbox. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
For module activation, ONLY the serial number of the key and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). More about J2534 here.
To connect the control unit on the table, you need to purchase additional equipment, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
