Software module for working with JLR and Volvo Denso engine control units
The module requires the purchase of a USB protection key. The key can be purchased in our store. An unlimited number of modules can be purchased with one key.
Which vehicles and control units is the 68 PCM FLASH module intended for:
- Freelander 2 (L359) 3.2L V6 233PS (Denso)
Read, write, check, and correct checksum.
- Jaguar XF/XJ (X250/X351) 3.0L V6 240PS (Denso) [8×23/9×23]
Read, write, check, and correct checksum.
- Range Rover Sport (L320) 5.0L V8 SC (Denso)
Read, write, check, and correct checksum.
- Volvo XC90 29bit 2006-2010 3.2L (Denso) [Test] (not all vehicles may be supported, testing is in progress)
- Volvo XC90 29bit 2006-2010 4.4L (Denso) [Test] (not all vehicles may be supported, testing is in progress)
Read, write, check, and correct checksum.
J2534 adapter (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.) is required for OBD2 connector operation. You can buy J2534 adapter in our store.
Additional equipment is required to connect the control unit on the table, any of the following:
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference