
Software module for working with the engine control unit of Honda Bosch cars
To use the module, you need to purchase aUSB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
Which cars and control units is the 66 PCM FLASH module designed for:
- PGM-FI (Bosch EDC17CP06/EDC17CP16/2MB)
Writing, checksum verification.
- PGM-FI (Bosch EDC17CP50/4MB) [Unlocked]
- PGM-FI (Bosch EDC17C58/4MB) [Unlocked]
- PGM-FI (Bosch EDC17C72/2.5MB) [Unlocked]
- PGM-FI (Bosch MED17.9.3/4MB) [Unlocked]
- PGM-FI (Bosch ME17.9.55/1.5MB) [Unlocked]
Writing, checksum verification (writing after unlocking with package 53 or 71)
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose and others). You can buy J2534 adapter in our store.
To connect the control unit on the table, you need to purchase additional equipment, any of the following:
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.