Software module for working with the engine control unit of Kia/Hyundai EDC17 cars
The module requires the purchase of a USB protection key. The key can be purchased in our store. An unlimited number of modules can be purchased with one key.
The module 36 PCM FLASH is intended for the following cars and control units:
- 1.6L, 2.0L CRDI (EDC17C08/TPROT3)
- 2.0L, 2.2L CRDI (EDC17CP14/TPROT3)
- 2.0L, 2.2L, 3.0L CRDI (EDC17CP14/TPROT11)
- 1.6L, 2.0L CRDI (EDC17C53)
Read, write, checksum verification.
- 2.2L CRDI (EDC17C57)
Read, write, checksum verification. (write after unlocking with module 53)
- AdBlue ECU EDC17PC42/PC43
- 2.0L, 2.2L, 3.0L AdBlue CRDI (DCU17PC42/DCU17PC43) [RD/WR/CK]
- Read, write, checksum verification. (write after unlocking with module 53 or 71)
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). You can buy J2534 adapter in our store.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
-
There are no reviews for this product.
-
No questions yet
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.