Software module for working with the engine control unit of Kia/Hyundai cars EDC15/EDC16
To use the module, you need to purchase a USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
Which cars and control units is module 34 PCM FLASH designed for:
- 2.0L, 2.5L CRDI K-Line (EDC15C7)
Read, write, checksum verification.
- 2.0L, 2.2L, 2.5L CRDI (EDC16C39)
- 3.0L CRDI (EDC16CP34)
Write, checksum verification.
- 2.0L, 2.2L, 2.5L CRDI K-Line Calibration (EDC16C39)
- 3.0L CRDI K-Line Calibration (EDC16CP34)
Read, write, checksum verification.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). You can buy J2534 adapter in our store.
To connect the control unit on the table, additional equipment needs to be purchased, any of the following:
-
There are no reviews for this product.
-
No questions yet
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.