Software module for working with the engine control unit of Ford Kuga 2 and Ford Explorer cars from 2011
To use the module, you need to purchase a USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
The 2 PCM FLASH module is designed for the following cars and control units:
- Ford Focus 3: 1.0L Ecoboost 2015+ GTDI 100/125PS [FV6A] (MEDG17)
- Ford Kuga 2: 1.6L Ecoboost GTDI AWD 150/182PS (MEDG17)
- Ford Mondeo 5: 1.5L Ecoboost GTDI AT 150/180PS (MEDG17)
- Ford Mondeo 5: 2.0L Ecoboost GTDI 200PS (MEDG17)
- Ford Explorer 2011-: 3.5L Ecoboost V6 GTDI 360PS (MEDG17)
- Ford Kuga 2: 2.5L Duratec Ti-VCT 150/171PS
- Ford Mondeo 5: 2.5L Duratec Ti-VCT 150/171PS
- Ford Explorer 2011-: 3.5L Cyclone V6 Ti-VCT 294PS
Read, write, checksum verification.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose and others). You can buy J2534 adapter in our store.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.