Software module for reading firmware from Denso motorcycle engine control unit.
Service module for identification and virtual reading of firmware from Denso control units with the part number 32920-4xxxx. The ECU is based on the Renesas SH7052 processor.
Actual reading of flash memory from this block is possible only by drilling a fairly large hole in the housing to access the AUD port pad. This may negatively affect further outdoor use and does not guarantee 100% water resistance.
The module allows obtaining a correct stock file without disassembling or drilling.
You can identify the software version in the block via K-line and retrieve the file if it is available on our server.
Which vehicles and control units are supported by the Bitbox Moto/Extreme Denso Virtual Reader module:
- FIDs: 64, 103
- Arctic Cat Denso Virtual Reader (FID: 64)
- Suzuki Moto Denso Virtual Reader (FID: 103)
Attention! We do not provide files upon request via email, Skype, etc. You must use the module with the snowmobile or control unit to obtain the file.
Attention! The module does not support writing.
We do not accept any claims about the inability to retrieve a file from the server if we don't have it.
Attention! The module is activated for free to users of the BitEdit Arctic Cat Denso module.
To use the module, you need to purchase a Bitbox USB dongle . You can purchase the dongle in our store. One dongle can be used to activate an unlimited number of modules.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the dongle and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). Learn more about J2534 here .
To connect the control unit on the bench, additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.