Module for reading and writing flash memory of Bosch MED17 control units installed on Jaguar/Land Rover petrol cars.
Module for reading and writing flash memory of Bosch MED17 control units via CAN bus, installed on Jaguar and Land Rover diesel cars.
Which cars and control units does the Bitbox Jaguar / Land Rover Bosch MED17 Petrol CAN module support:
FIDs: 328, 329, 332
JLR Bosch MED17.0 (FID:328)
This family supports work with Bosch MED17.0 control units based on Infineon TC1767 with internal flash memory of 2 MB.
Allows software identification, reading and writing. Checksum correction is done during writing.
JLR Bosch MED17.8.31 (FID:329)
This family supports work with Bosch MED17.8.31 control units based on Infineon TC1797 with internal flash memory of 4 MB.
Allows software identification, reading and writing. Checksum correction is done during writing.
JLR Bosch MED17.9.7 (FID:332)
This family supports work with Bosch MED17.9.7 control units based on Infineon TC1767 with internal flash memory of 2 MB.
Allows software identification, reading and writing. Checksum correction is done during writing.
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
The module activation requires ONLY the serial number of the key and email.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.