Hurry to buy Promotion ends left
-
Discounts for module payments:
- 2–3 modules — extra 5% discount (use coupon BIT25_15)
- 4+ modules — extra 10% discount (use coupon BIT25_20)
- Carlist BitBox
Software module for working with the Delphi engine control unit of Ford diesel cars.
Module for reading and writing flash memory of Delphi control units installed on Ford diesel cars via CAN bus.
Which cars and control units does the Bitbox Ford Delphi Diesel CAN module support:
FIDs: 301, 302, 318
Ford Delphi DCM3.5 (FID: 301)
This family supports working with Delphi DCM3.5 control units based on the MPC5566 processor with internal 3MB flash memory.
Allows reading and writing of calibration area. Checksum correction is performed during writing.
Ford Delphi DCM6.1 (FID: 302)
This family supports working with Delphi DCM6.1 control units based on the TC1797 processor with internal 4MB flash memory.
Allows reading and writing of calibration area. Checksum correction is performed during writing.
Ford Visteon DCU-10x/DCU-20x (FID: 318)
This family supports working with Visteon DCU-101/102/104/201 control units based on the ST10F276 processor with internal 896KB address space.
Allows identification of software, reading and writing via CAN bus. Checksum correction is performed during writing.
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.