Hurry to buy Promotion ends left
-
Discounts for module payments:
- 2–3 modules — extra 5% discount (use coupon BIT25_15)
- 4+ modules — extra 10% discount (use coupon BIT25_20)
- Carlist BitBox
Software module for working with the engine control unit of Gen1 petrol vehicles of the FCA group.
Module for reading and writing through the diagnostic connector of Chrysler/Dodge/Jeep and Fiat vehicles with Motorola NGC3, NGC4, NGC4A, and Continental GPEC, GPEC2 control units.
It allows tuning of most vehicles of the mentioned brands produced from 2004 to 2014. The presence of a CAN bus in the vehicle is the main criterion when choosing the module.
It is possible to work with the control unit on the bench without disassembling the ECU.
Available features include software version identification, FullFlash reading, calibration area writing, and checksum correction during writing.
Which vehicles and control units are supported by the Bitbox FCA Petrol Gen1 CAN module:
FIDs: 12, 13, 14, 15, 16, 17
- Motorola NGC3 MPC565 1Mb (FID: 12)
- Motorola NGC4 MPC5554 2Mb (FID: 13)
- Motorola NGC4A MPC5554 2Mb (FID: 15)
- Continental GPEC (SIM90) MPC561+EXT.FLASH 2Mb (FID: 16) - calibration area only
- Continental GPEC2 MPC5566 3Mb* (FID: 14)
* - for cars up to 2014. Newer cars have RSA verification inside and require unlocking. For these blocks, the FCA Petrol Gen2 CAN module is required.
To use the module, you need to purchase a Bitbox USB dongle . You can purchase the dongle in our store. One dongle can be used to activate an unlimited number of modules.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the dongle and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). Learn more about J2534 here .
To connect the control unit on the bench, additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.