BitBox Delphi MT05 / MT05.2 / MT05.3 / MT05.9 Moto Module
The BitBox Delphi MT05 Family Module (FID: 2) is a dedicated software solution developed for professional chip tuners, motorcycle specialists, and powersports calibration workshops. This module enables full, reliable communication with Delphi MT05, MT05.2, MT05.3, and MT05.9 engine control units (ECUs) over the diagnostic OBD-II port or directly on the bench
FID: 2
To activate the module you need a USB dongle BitBox/BitEdit. When ordering, please indicate the Serial Number of the key.
Equipped with smart flash size auto-detection and real-time checksum recalculation on write, FID: 2 guarantees safe, efficient reading and calibration writing across multiple microcontroller architectures.
Key Capabilities & Functions
- ECU Software Identification: Instantly reads out factory software IDs, hardware part numbers, and calibration variants.
- FullFlash Reading with Auto-Detection: Automatically detects the exact internal flash memory size, ensuring an accurate and complete binary dump without manual sizing errors.
- Calibration Area Writing: Fast, secure writing of modified fuel maps, ignition tables, and rev limiters directly to the calibration area.
- Automatic Checksum Correction: Hardware-level checksum calculation applied automatically during the write procedure to prevent write errors and bricked ECUs.
- Flexible Connection Modes: Supports flashing both in-vehicle via OBD and out-of-vehicle on the bench.
Supported ECUs & Microcontroller Architecture
| ECU Type | Microcontroller (MCU) | Internal Flash Size |
| Delphi MT05 | Infineon SAK-XC164CM-16F40F | 128 KB |
| Delphi MT05.2 / MT05.3 | Infineon SAK-XC164CS-32F40BB | 256 KB |
| Delphi MT05.3 | NXP SPC5634 | 1.5 MB |
| Delphi MT05.9 | NXP SPC572 | 1.5 MB |
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference