Module for reading and writing flash memory of Bosch MG1 engine control units for Chinese petrol cars.
Which cars and control units does the Bitbox China Bosch MG1 Petrol module support:
- China Bosch MG1UA008 BAIC/DFM/FAW/SWM/SGMW (FID: 427) with SPC574 2.5Mb R/W/CS
- China Bosch MG1UA008 Chery/Jetour (FID: 431) with SPC574 2.5Mb R/W/CS
- China Bosch MG1UA008 Great Wall/Haval (FID: 423) with SPC574 2.5Mb R/W/CS
- China Bosch MG1UA008/UP8 JAC/Geely/Changan (FID: 424) with SPC574 2.5Mb R/W/CS
- China Bosch MG1US008 BAIC (FID: 430) with TC277 4Mb R/W/CS
- China Bosch MG1US008 Chery/Exeed (FID: 421) with TC277 4Mb R/W/CS
- China Bosch MG1US008 Dongfeng/FAW (FID: 422) with TC277 4Mb R/W/CS
- China Bosch MG1US008 Great Wall/Haval (FID: 420) with TC277 4Mb R/W/CS
- China Bosch MG1US008 SAIC (FID: 429) with TC277 4Mb R/W/CS
- China Bosch MG1US008/UD8 Changan (FID: 425) with TC277 4Mb R/W/CS
- China Bosch MG1US008/UD8 GAC (FID: 446) with TC277 4Mb R/W/CS
- China Bosch MG1US708 Geely/Lynk&Co (FID: 428) with TC387QP 10Mb R/W/CS
Please note! The regions for reading and writing for each type of control unit are specified in the manual. Some types of control units require direct connection to the connector. Writing a faulty mod file can result in complete inoperability of the unit without the possibility of recovery.
New FIDs will be added to the module.
The module requires the purchase of a Bitbox USB key for operation. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More about J2534 here.
To connect the control unit on the bench, additional equipment from the list below is required:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference