Software module for working with the engine control unit of SsangYong diesel vehicles with Delphi control units. (FCA).
Module for reading and writing Delphi control units installed on SsangYong diesel vehicles.
Which vehicles and control units are supported by the Bitbox SsangYong Delphi Diesel module:
FIDs: 32, 33, 34, 87
SsangYong Delphi DCM6.2AP (FID: 32)
They are based on the NXP SPC5673 processor with internal memory of 3MB.
Reading and writing of calibration area via CAN bus, checksum correction are available. Recovery is possible from any state after communication or power failure.
Supported vehicles:
- SsangYong Tivoli/XLV D16DTF
- SsangYong Rodius/Stavic II D22DTR
- SsangYong Korando C/New Actyon D22DTF
- SsangYong Rexton D22DTR
SsangYong Delphi DCM6.2AP-6D (FID: 87)
They are based on the NXP SPC5674 processor with internal memory of 4MB.
Reading and writing of calibration area via CAN bus, checksum correction are available. Recovery is possible from any state after communication or power failure.
Supported vehicles:
- SsangYong Rexton G4 D22DTR-SCR
SsangYong Delphi DCM3.7AP (FID: 33)
The control units are based on the Renesas SH72513 processor with internal flash memory of 2MB.
FullFlash reading and writing of calibration area via CAN bus, checksum correction are available.
Supported vehicles:
- SsangYong Actyon Sports D20DTR
- SsangYong Korando C/New Actyon D20DTF
- SsangYong Rexton D20DTR
- SsangYong Rodius D20DTR
- SsangYong Stavic II D20DTR
SsangYong Delphi DCM3.2AP (FID: 35)
The control units are based on the Motorola MPC563 processor with external flash memory AM29BDD160GB with a total address space of 2.5MB.
FullFlash reading, writing via K-line, checksum correction are available.
Supported vehicles:
- SsangYong Actyon D20DT Euro4
- SsangYong Actyon Sports D20DT Euro4
- SsangYong Kyron D20DT Euro4
- SsangYong Kyron D27DT Euro4
- SsangYong Rexton D20DT Euro4
- SsangYong Rexton D27DT Euro4
- SsangYong Rodius D27DT Euro4
SsangYong Delphi DCM3.1 (FID: 34)
The control units are based on the Motorola MPC555 processor with internal flash memory of 448KB.
FullFlash reading and writing of calibration area via K-line, checksum correction are available.
Supported vehicles:
- SsangYong Actyon D20DT Euro3
- SsangYong Actyon Sports D20DT Euro3
- SsangYong Kyron D20DT Euro3
- SsangYong Kyron D27DT Euro3
- SsangYong Rodius D27DT Euro3
- Tata Safari 3.0 DiCOR
- Tata Xenon 3.0 DiCOR
To use the module, you need to purchase a Bitbox USB dongle . You can purchase the dongle in our store. One dongle can be used to activate an unlimited number of modules.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the dongle and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). Learn more about J2534 here .
To connect the control unit on the bench, additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.