Software module for engine control unit Siemens/Continental SIM271 vehicles Mercedes.
Module for reading and writing through the diagnostic connector and "on the bench" of Siemens/Continental SIM271DE2.0 and Siemens SIM271KE2.0 control units installed in Mercedes-Benz petrol vehicles.
Which vehicles and control units are supported by Bitbox MB Siemens/Continental SIM271:
FIDs: 209, 213
Continental SIM271DE2.0 (FID: 209)
FID supports work with Continental SIM271DE2.0 control units based on Infineon Tricore TC1796 processor with 2MB internal memory.
Enables reading and writing of calibration area through CAN bus. The control unit does NOT require opening, it is read and written through the diagnostic connector. Checksum correction is done during writing.
Siemens SIM271KE2.0 (FID: 213)
FID supports work with Siemens SIM271KE2.0 control units based on Infineon Tricore TC1796 processor with 2MB internal memory.
Enables reading and writing of calibration area through CAN bus. The control unit does NOT require opening, it is read and written through the diagnostic connector. Checksum correction is done during writing.
Attention! Reading/writing through the diagnostic connector may not work on some vehicles due to equipment peculiarities. In this case, use bench connection (disassembly of the control unit is not required).
To use the module, the purchase of Bitbox USB protection key Bitbox is required. The key can be purchased in our store. You can buy an unlimited number of modules with one key.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).
For module activation, ONLY the serial number of the key and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More information about J2534 here.
To connect the control unit on the bench, the purchase of additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.