Software module for working with Mazda SkyActiv-G petrol engine control units.
Module for reading and writing Denso and Mitsubishi control units installed in Mazda petrol vehicles with SkyActiv-G engines.
Which vehicles and control units does the Bitbox Mazda SkyActiv-G Petrol CAN module support:
FIDs: 240, 241, 243, 244, 249
Mazda Denso Gen3 (D02) (FID: 244)
The control unit is based on the Renesas SH72543 processor with 2.0Mb internal flash memory.
Allows reading and writing via CAN bus with checksum correction.
Mazda Denso Gen3 (D03) (FID: 243)
Alternative name for the control unit type is Denso Gen3 Crypto. The control unit is based on the Renesas SH72543 processor with 2.0Mb internal flash memory.
Allows reading and writing via CAN bus with checksum correction.
Mazda Denso Gen4 (D08) (FID: 249)
The control unit is based on the NXP MPC5746 processor with 4.0Mb internal flash memory.
Allows reading and writing via CAN bus with checksum correction.
Mazda Denso Gen4 (D11) (FID: 247)
The control unit is based on the NXP MPC5746 processor with 4.0Mb internal flash memory.
Allows virtual reading and writing via CAN bus with checksum correction.
Mazda Mitsubishi Gen3 (M03/M04) (FID: 240)
The control unit is based on the MH8501 processor with 2.0Mb internal flash memory.
Allows reading and writing via CAN bus with checksum correction.
Mazda Mitsubishi Gen3 (M09) (FID: 241)
The control unit is based on the MH8501 processor with 2.0Mb internal flash memory.
Allows reading and writing via CAN bus with checksum correction.
Mazda Mitsubishi Gen4 (M13/M16/M41) (FID: 248)
The control unit is based on the NXP MPC5746 processor with 4.0Mb internal flash memory.
Allows reading and writing via CAN bus with checksum correction.
The module requires the purchase of a USB dongle for protection. The dongle can be purchased from our store. An unlimited number of modules can be activated on one dongle.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the dongle's serial number and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More information about J2534 can be found here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.