Software module for working with the Bosch MG1 engine control unit in Ford petrol cars.
Module for reading and writing through the diagnostic connector of Ford cars with Bosch MG1 control units.
Which cars and control units does the Bitbox Ford Bosch MG1 Petrol CAN module support:
FIDs: 180, 181
Ford Bosch MG1CS015 TC277 (FID: 180)
The family supports working with Ford Bosch MG1CS015 units based on the Infineon Aurix TC277 processor with 4 MB of internal memory.
Allows reading and writing through the CAN bus via the diagnostic connector. Checksum correction is done during writing.
Ford Bosch MG1CS017/MG1CS018/MG1CS019 TC298 (FID: 181)
The family supports working with Ford Bosch MG1CS017, MG1CS018, and MG1CS019 units based on the Infineon Aurix TC298 processor with 8 MB of internal memory.
Allows reading and writing through the CAN bus via the diagnostic connector. Checksum correction is done during writing.
Bosch MG1CS016 units are under development and will be added if possible.
The module requires the purchase of a USB protection key Bitbox. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). More about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.