Continental M3C BitBox

Continental M3C BitBox $282.50

Points: 3

In stock

BitSoft Brand

$282.50

Price in reward points: 283

Carlist BitBox

E-Mail

Serial number

Description

Software module for working with Continental M3C motorcycle engine control unit.

The module is used for working with Continental M3C control units through the diagnostic connector and on the bench.

It allows for software version identification, reading and writing full flash via CAN bus, verification and checksum calculation of calibration areas and EEPROM areas.

Which engines and control units does the Bitbox Continental M3C module support:

FIDs: 191, 192, 193, 194, 195, 196

Arctic Cat Continental M3C 9S12XE (FID:194)
BRP Continental M3C 9S12XE (FID:193)
Ducati Continental M3C 9S12XD (FID:191)
Ducati Continental M3C 9S12XE (FID:192)
KTM/Husqvarna Continental M3C 9S12XE (FID:196)
Beta/Kymco/Sherco/Stels/TGB Continental M3C 9S12XE (FID:195)

Attention! The files read by this module contain virtual EEPROM with mileage data, VIN, keys, etc. The module can be used for cloning. Any mod file must be based on the read file.

Attention! The module is guaranteed to work when the control unit is connected on the bench. Operation through the diagnostic connector is also available if there is no interfering equipment installed on the vehicle, such as an electronic instrument cluster, power steering, etc. If something interferes with OBD operation, it is necessary to either disable that system or use bench connection.

To use the module, you need to purchase a Bitbox USB dongle. You can purchase the dongle in our store. One dongle can be used to activate an unlimited number of modules.

Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).

Module activation requires ONLY the serial number of the dongle and email.

To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). Learn more about J2534 here.

To connect the control unit on the bench, additional equipment is required, any of the following:

Powerbox and Combibox for PCMflash are fully compatible with Bitbox.

Return policy

An activated module or license cannot be returned.

If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.

After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.

Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.

Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.

Your Recently Viewed Items

Bestseller Points: 2