Software module for working with Delphi engine control unit of Chinese petrol vehicles.
Module for reading and writing flash memory of Delphi engine control units for Chinese petrol vehicles.
Which vehicles and control units does the Bitbox China Delphi Petrol module support:
- Delphi MT20U (FID: 51) with Motorola MC912DT128 128Kb - R/W/CS
- Delphi MT20U2 (FID: 59) with Motorola MC9S12KG256 256Kb - R/W/CS
- Delphi MT22.1 (FID: 52) with Motorola MC9S12XEP768 768Kb - R/W/CS
- Delphi MT22.1 IAC (FID: 158) with Motorola MC9S12XEQ512 512Kb - R/W/CS
- Delphi MT22U (FID: 53) with Motorola MC9S12XET256 256Kb - R/W/CS
- Delphi MT20UED (FID: 58) with Motorola MC9S12KG256 256Kb - R/W/CS
- Delphi MT22.1.1 HW1 (FID: 54) with Motorola MC9S12XET256 256Kb - R/W/CS
- Delphi MT22.3 (FID: 463) Chery with NXP SPC563M64 1.5Mb - R/W/CS
- Delphi MT22.3/MT22.5 (FID: 462) Lifan with NXP SPC563M64 1.5Mb - R/W/CS
- Delphi MT34 (FID: 55) with Infineon Tricore + EXT.Flash 1Mb - R/W/noCS - test
- Delphi MT62.1 K-line (FID: 56) with NXP SPC5634 1.5Mb - R/W/noCS
- Delphi MT62.1 CAN (FID: 146) with NXP SPC5634 1.5Mb - R/W/noCS
- Delphi MT62.1 JAC CAN (FID: 408) with NXP SPC5634 1.5Mb - R/W/noCS
- Delphi MT80 (FID: 61) with Infineon Tricore TC1762 1.5Mb - R/W/CS
- Delphi MT92/MT92.1 (FID: 86) with Infineon Tricore TC17xx 2Mb/2.5Mb - R/W/noCS
- Delphi MT95.1 (FID: 455) Changan with Infineon Aurix TC367 4Mb - R/W/CS
- Delphi MT95.1 (FID: 456) ECU#1 Tank with Infineon Aurix TC367 4Mb - R/W/noCS
- Delphi MT95.1 (FID: 457) ECU#2 Tank with Infineon Aurix TC367 4Mb - R/W/noCS
- AECS FC-34 DongFeng Type 1 (FID: 482) with NXP SPC563M64 1.5Mb - R/W/CS
- AECS FC-34 DongFeng Type 2 (FID: 483) with NXP SPC563M64 1.5Mb - R/W/CS
- AECS FC-34 IKСO (FID: 481) with NXP SPC563M64 1.5Mb - R/W/CS
- AECS FC-34 JAC (FID: 476) with NXP SPC563M64 1.5Mb - R/W/CS
- AECS FC-34 Jinbei/Brilliance (FID: 472) with NXP SPC563M64 1.5Mb - R/W/CS
- AECS FC-50 DongFeng (FID: 468) with NXP SPC563M64 1.5Mb - R/W/CS
The module requires the purchase of USB dongle for protection Bitbox. The dongle can be purchased from our store. An unlimited number of modules can be activated on one dongle.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the dongle's serial number and email are required.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). More information about J2534 here.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.