Software module for working with Bosch engine control unit of Chinese petrol vehicles.
Module for reading and writing flash memory of Bosch engine control units for Chinese petrol vehicles.
Which vehicles and control units does the Bitbox China Bosch Petrol module support:
Bosch M7.9.7 (FID: 239)
The Bosch M7.9.7 engine control unit is based on the C167 processor with external flash memory of 512KB. It supports virtual reading and writing, as well as checksum correction
Bosch ME7.9.7 (FID: 68)
The Bosch ME7.9.7 engine control unit is based on the C167 processor with external flash memory of 1MB. It supports virtual reading and writing, as well as checksum correction.
Bosch M(E)7.9.71 (FID: 232)
The Bosch M(E)7.9.71 engine control unit is based on the ST10F275 processor with internal flash memory of 832KB. It supports virtual reading and writing, as well as checksum correction.
Bosch M7.8 (FID: 57)
The Bosch M7.8 engine control unit is based on the ST10F275 processor with internal working address space of 832KB. It supports virtual reading, writing with auto-protection disabled, as well as checksum correction.
Bosch ME7.8.8 K-line (FID: 63)
The Bosch M7.8.8 engine control unit is based on the ST10F275 processor with internal working address space of 832KB. It supports virtual reading, writing with auto-protection disabled via K-line, as well as checksum correction.
Bosch ME7.8.8 CAN (FID: 76)
The Bosch M7.8.8 engine control unit is based on the ST10F275 processor with internal working address space of 832KB. It supports virtual reading, writing with auto-protection disabled via CAN bus, as well as checksum correction.
Bosch ME17.8.8 (FID: 60)
The Bosch ME17.8.8 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading and writing of calibration area, as well as checksum correction.
Bosch ME17.8.8 Saic (FID: 127)
For Saic vehicles. The Bosch ME17.8.8 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading and writing of calibration area, as well as checksum correction.
Bosch ME17.8.8 Vantage (FID: 166)
For Vantage vehicles. The Bosch ME17.8.8 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading and writing of calibration area, as well as checksum correction.
Bosch ME17.8.8.1 (FID: 82)
The Bosch ME17.8.8.1 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading and writing of calibration area, as well as checksum correction.
Bosch ME17.8.8.1 Geely (FID: 84)
For Geely vehicles. The Bosch ME17.8.8.1 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading and writing of calibration area, as well as checksum correction.
Bosch MED17.8.10 Haval (FID: 122) /TEST/
For Haval vehicles. The Bosch MED17.8.10 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading on the bench and writing via the diagnostic connector, as well as checksum correction.
Bosch MED17.8.10 Geely (FID: 234) /TEST/
For Geely vehicles. The Bosch MED17.8.10 engine control unit is based on the Infineon Tricore TC1728 processor with internal flash memory of 1.5MB. It supports reading on the bench and writing via the diagnostic connector, as well as checksum correction.
BYD TB10 Type1 (FID: 81)
The BYD TB10 engine control unit is based on the Renesas SH72531 processor with internal flash memory of 1.25MB. It supports reading and writing of calibration area, as well as checksum correction.
BYD TB10 Type2 (FID: 148)
The BYD TB10 engine control unit is based on the Renesas SH72531 processor with internal flash memory of 1.25MB. It supports virtual reading and writing of calibration area, as well as checksum correction.
Bosch M7.8/ME7.8.8 BSL K-line (FID: 75)
Allows reading Bosch M7.8/ME7.8.8 K-line blocks based on protected ST10F27X processors in BSL mode. Requires the BITS001 or Powerbox / Combibox adapter. Guaranteed compatibility only with Tactrix Openport 2.0 adapter.
To use the module, you need to purchase a Bitbox USB dongle. You can purchase the dongle in our store. One dongle can be used to activate an unlimited number of modules.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed during weekends and holidays (up to 2 hours).
Module activation requires ONLY the serial number of the dongle and email.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). Learn more about J2534 here.
To connect the control unit on the bench, additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.