Menu
Cart 0$0
    Messenger support
    Cart 0$0
    Search
    Cart 0$0
    Cart
    Your shopping cart is empty!
    Crash Data reset Firmware edit Mileage restoration
    Brands
    VolvoCarTool Licenses Car scanners Scripts for UPA-USB programmer J2534 adapters Programmers CAN-Hacker – CAN & LIN analyzers Adapters
    Brands
    Universal devices Loaders, flashers Firmware editors J2534 adapters Cables and adapters Wireless adapters Acceleration dynamics measuring
    Brands
    Programmers
    Brands
    Programmers MD Flasher STool Gromcalc / Probyte iProg Pro
    Brands
    BitBox BitEdit Calculators for iProgGuard and iProgPro CAN-Hacker ChipTuningPro Combiloader ECULite Flex FORScan Gprog iProg scripts MDflasher MHD Flasher Mitsubishi ECU flasher MMC flash OBDstar PCMflash Poldiag ProByte ProByte firmware editor STool SVEdit ThinkCar UCDS UPA scripts VCTS (VolvoCarTool) Xtool
    Brands

    UCDS v.5

    UCDS v.5
    UCDS v.5 $263
    UCDS v.5
    UCDS v.5
    UCDS v.5
    UCDS v.5
    UCDS v.5
    Popular Bestseller Points: 3
    UCDS v.5
    UCDS v.5
    UCDS v.5
    UCDS v.5
    In stock Product code: ucds
    UCDS Brand

    $263

    Price in reward points: 263

    Shipping Information
    Description

    Original UCDS v.5 adapter - a novelty from St. Petersburg developers for diagnostics, coding, programming, localization, and chip tuning of Ford cars.

    The main difference of the new UCDS adapter version 5 from the old versions is the support for the most modern Ford cars of 2022-2023 production years. The hardware is designed with great potential for future updates. Technical support for all American electric vehicles is fully implemented.

    The basic configuration of the device is supplied without licenses, in the order you can select additional licenses of your choice

    The UCDS 5 diagnostic adapter is made on a standard printed circuit board using the most modern high-performance electronic components. In the new version of the adapter, the adapter can be connected to the computer via wireless WiFi or USB for working with modern software.

    The difference between version 5 adapter and old devices:

    • Added support for CAN FD protocol with three independent buses, hardware support for LIN, K\L-Line.
    • WiFi operation in two modes: connecting to the adapter as an access point or connecting the adapter to a Wi-Fi network.
    • Supports working with ECU modules in "Stand" mode, the adapter generates GPT signals (operation verified by PCMFLASH software complex)

    The UCDS adapter and software package can perform the following functions:

    • Diagnose all electronic modules of the car via the CAN bus
    • Display data about car modules, such as their catalog number, calibration version, serial number.
    • Encode the central configuration of the car, as well as individual blocks, retrofit the car, activate hidden options.
    • Update control unit firmware
    • Perform localization of factory multimedia systems
    • Activate the automatic folding mirror function.
    • Localization of Convers+ instrument panels, firmware of modified software from Motral to expand the capabilities of the factory instrument panel
    • Correction of mileage on the instrument panel and other blocks
    • Perform chip tuning
    • Perform non-factory chip tuning, disable lambda probes, DPF, EGR, swirl flaps.
    • Perform activation and adaptation of control units, reset adaptive values.
    • Reset and set service intervals
    • And many other functions

    The Universal Control Unit Diagnostic System (UCDS) adapter can work in two modes:

    • Using UCDS software
    • In J2534 mode for working with third-party software

    UCDS v.5 adapter licenses:

    • ODO License - mileage reset function, as well as all functions for which level 1 tokens were previously written off
    • EXT License - extended license
    • PATS License - a license that provides access to PATS functions (working with Ford car keys)

    The kit includes:

    • UCDS v.5 adapter
    • Software

    To work with control units on the bench, we recommend a special Powerbox for UCDS .

    Licenses
    Adapters
    Related Products
    Popular Bestseller
    PowerBox for UCDS + Scanmatik
    PowerBox for UCDS + Scanmatik
    PowerBox for UCDS + Scanmatik
    In stock PowerBox for UCDS + Scanmatik

    $50

    Recommended Articles
    Installation and activation UCDS
    Installation and activation UCDS 9 March, 2024
    Please select required options
    • EXT license for UCDS
      In Stock
      EXT license for UCDS

      $60

      EXT License UCDS – Extended License for Universal CAN Diagnostic System The EXT License is an extended license for the UCDS software project that grants access to the following key features. Key features EXT license: VBF Loader. The VBF Loader section allows users to independently load .VBF files into various modules of Ford vehicles. This tool is essential for updating and configuring control units. Update Wizard. Update Wizard enables the updating of Ford vehicle module software using the latest IDS database files. Note: Not all modules can be updated through this section. In some cases, update files may be unavailable due to security policies or because the module supports alternative update methods (e.g., via USB or SD card). Direct Config. The Direct Config section provides direct configuration of Ford vehicle modules. This feature is especially important for Ford Mondeo 5 and newer models, as these can only be configured using this section. License Activation: To activate the license, please include UCDS V5 serial number in the order. After activation, you will receive an email confirming that your order has been completed. Please close the UCDS software and restart it as administrator to ensure the license is properly activated.

    • ODO license for UCDS
      In Stock
      ODO license for UCDS

      $24

      ODO License UCDS – Odometer Correction, Power Upgrade, and More for Ford The ODO License for UCDS software can be activated for 1 month, 6 months, or 1 year. It provides access to advanced vehicle configuration and programming features for Ford vehicles. Key Features: Mileage Reset (Odometer Correction) – Reset or correct the mileage on compatible Ford models. Engine Power Increase – Upgrade the engine power by flashing standard software from a more powerful version (e.g., Ford Focus 3 150HP → 163HP). Russification of Sony Gen2 Radios – Localize Sony second-generation radios with pink backlight and plastic central volume knobs. Mirror Auto-Folding Configuration – Program auto-folding mirrors on Ford Focus 2 (2008+) models when locking the car. Additional Programming Functions – Access various extra configuration and coding options depending on vehicle compatibility. During the license period, all features requiring this license can be used unlimited times. License Activation: To activate the license, please include UCDS V5 serial number in the order. After activation, you will receive an email confirming that your order has been completed. Please close the UCDS software and restart it as administrator to ensure the license is properly activated.

    • PATS license for UCDS
      In Stock
      PATS license for UCDS

      $60

      PATS License UCDS – Key Programming & Module Initialization for Ford The PATS License provides 7-day access to essential functions related to vehicle security and module replacement in Ford vehicles. Key Features: Key Deletion and Programming – Delete old car keys and program new ones to the vehicle’s system. Module Initialization – Initialize replacement modules that require integration with the PATS (Passive Anti-Theft System). Essential for Module Replacement – Use this license when installing new control units that must be registered with the vehicle's anti-theft system. License Activation: To activate the license, please include UCDS V5 serial number in the order. After activation, you will receive an email confirming that your order has been completed. Please close the UCDS software and restart it as administrator to ensure the license is properly activated.

    • PowerBox for UCDS + Scanmatik
      In Stock
      PowerBox for UCDS + Scanmatik

      $50

      This PowerBox allows you to use the J2534 compatible UCDS adapter as a device to connect to various control units "on the bench" (such as engine control units, SRS units, and other units that use communication through various data buses available on the used OBD adapter). You can use either a cable with a 15-pin DB15 connector from KTAG or use Dupont cables from Arduino, connecting them to the carriage. Alternatively, you can create your own cable based on the pinout of the PowerBox output (there is a pinout decoding for each DB15 pin on the reverse side of the board). Since this PowerBox is equipped with the ability to control power through L-line and control Boot pins through the 12-pin OBD (Boot, Reset, CNF), it can work with bootloaders where the corresponding module is required (for example, PCMFlash - modules 53, 71, 77; BitBOX - working with Sim2k-25x, 26x units). This PowerBox also enables work with other bootloaders like MDFlasher, AlexFlasher, Combiloader (if the loader package is not used for line switching with the unit and the Dialink adapter is not used as a source of GPT signals*) and many others... * If Scanmatik 2 is used as the source of GPT signals, in the program settings, you need to select GPT1 - pin 1, GPT2 - pin 2, for their correct connection to the DB15 output. However, the Combiloader bootloader uses power control through the loader package, so it is not possible to work with it in Bench mode. PowerBox supports Bench mode operation with PCMFlash in combination with UCDS V5 adapter. To correctly route GPT signals from the adapter, make sure the "GPT" switch on the PowerBox board is in the released position. The carriage on the board is designed for convenient connection to the J2534 adapter. +12v on the carriage is not automatically powered and should not be used for Bench mode operation. For ease of use, the device's functionality is briefly labeled on the board's silkscreen. However, to understand the correct use of PowerBox, it is necessary to familiarize yourself with this manual. Device operation manual. Before using this device, make sure there is a safe voltage for all adapters used in conjunction with it. This device essentially acts as a signal splitter with power supply for connected devices, according to the pinouts of the corresponding connectors. If your device does not match the pinout of this PowerBox, it is not recommended to use it. First, connect all cables and wires, double-check the correspondence, and only then connect power to the DC 5.5*2.1 input. Voltage and current limitations: 36v 2A. UCDS Powerbox button assignments: “POWER” when pressed, supplies power to pin 16 of the OBD connector and the carriage “+12V” power from the DC connector, as well as to the DB15 VECU and VKEY outputs if the “12v_DB15” and “IGN” buttons are pressed, respectively. “GPT” when pressed, GPT1 is connected to pin 1, and GPT2 is connected to pin 2 of the OBD connector. When released, GPT1 is connected to pin 11, and GPT2 is connected to pin 8 of the OBD connector. This button is used to select the source of GPT signal generation. When pressed, it's for Scanmatik 2, and when released, it's for UCDS V5. “BOOT” is used to forcibly enable Boot pins. When released, automatic control is used (+5V from pin 12 of the OBD) if enabled by the DIP switch “AutoBoot DB15 Enable” and the “PIN12_OBD” button. When pressed, it forcibly controls the Boot pins if also enabled by the “PIN12_OBD” button. On the DB15 connector: Reset (GND through 1kOhm resistor) - 1 pin DB15 Boot (GND through 1kOhm resistor) - 10 pin DB15 CNF1 (+3.3V through 1kOhm resistor) - 4 pin DB15   “PIN12_OBD” sets the mode of using the 12-pin OBD. When released, it uses BOOT, allowing the choice of the DIP switch “AutoBoot DB15 Enable” and the “BOOT” button. When pressed, it is used as VPP to switch the programming enable on the VPP DB15 output (if necessary by the loader selection), completely disconnecting the BOOT line of the DIP switch and the DB15 outputs: Reset, Boot, CNF. “IGN_DB15” when pressed, supplies power to the 9 DB15 IGN (VKEY) output. When released, it uses automatic power (if enabled by the DIP switch “AutoPower DB15 Enable” in the ON position) or is turned off. “12V_DB15” allows selecting the power supply to the +12V (VECU) output of the DB15 connector in automatic mode, together with the IGN output (VKEY), either by pressing the “IGN_DB15” button or by using constant power directly from the DC PowerBox connector. By default, the button is released - together with IGN (with IGN_DB15). When pressed - constant power from DC (CONSTANT). This allows using +12V (VECU) wires when automatically supplying power, increasing the number of power wires when working in Bench mode. In the center of the board, there are 3 DIP switches for configuring the box for different loaders or situations: 120 Ohms For HS CAN Used to connect a 120-ohm terminating resistor to the HS-CAN bus. AutoPower DB15 Enable Enables automatic control of the power supply connectors, specifically, pin 15 of the OBD connector, and disconnects it from the AutoPower transistor. AutoBoot DB15 Enable Enables automatic control of boot pins through the 12-pin OBD connector. If it is necessary to supply Boot pin 17V (for example, when programming the Melco engine control unit) issued by SCANMATIK through AUX, then it is necessary to specify a different pin in the loader settings (for example, 8-pin "MM CAN-L") and take the necessary signal from the corresponding pin of the PowerBox carriage. This is because AUX is connected to the 25th contact of the SCANMATIK output and is not included in the OBD cable connector. When reprogramming some units, it requires supplying power from pin 13 of the OBD, which is issued by the adapter (Scanmatik2Pro). This pin is output to the DB15 output and also corresponds to pin 13. DB15 cable Note: For starting work, we recommend purchasing a DB15 cable, which is not included in the kit and is necessary for connecting to control units on the bench. For convenient connection, you can add Dupon Cable to your order.

    • DB15 cable for PowerBox
      In Stock
      DB15 cable for PowerBox

      $29

      Universal DB15-PIN cable for connecting to various control units. Used together with PowerBox for PCMflash, Combiloader, and other loaders, such as BitBox. The cable is equipped with an additional pair of contacts on the "VECU" circuit and a pair of additional contacts on the "VKEY" circuit, which together allows for up to eight power voltages to be supplied (four small contacts and four large ones).  To avoid confusion with identical colors, GPT1 and GPT2 are additionally marked and brought out separately with additional CAN-H CAN-L. The DB-15 connector is designed for connecting the ECU. It is recommended to use the DB15 - PIN cable. The connector has the following connection scheme: 1 BOOT brown 2 VPP purple 1 piece 3 GPT2 4 CNF1 blue 5 VECU +12V red 4 pieces 6 J1850 L 7 CAN-H white 9 VKEY orange 4 pieces 10 BOOT gray 11 GND black 2 pieces 12 GPT1 13 J1850 H 14 K-LINE yellow 15 CAN-L green To ensure error-free connection, the cable is additionally marked: gray BOOT wire, supplying 0 Volts, equipped with a black crocodile clip brown RESET wire, supplying 0 Volts, equipped with a black crocodile clip Blue CNF1 wire, supplying +3.3 Volts equipped with a red alligator clip

    • Cable Dupon F-F
      In Stock
      Cable Dupon F-F

      $5

      Flat cable with 40 separable colored conductors. Flexible soft thread with good insulation resistance and good toughness. It is a 40-cable strip (10 colors repeated 4 times) useful for use with Arduino or PCB circuits. Product characteristics: 40 single conductor; 30 cm length; Female - female

    1
    false
    false
    true
    Remove
    Change
    tr
    true