DB15 cable for PowerBox

The cable is equipped with an additional pair of contacts on the "VECU" circuit and a pair of additional contacts on the "VKEY" circuit, which together allows for up to eight power voltages to be supplied (four small contacts and four large ones).
 

To avoid confusion with identical colors, GPT1 and GPT2 are additionally marked and brought out separately with additional CAN-H CAN-L.

The DB-15 connector is designed for connecting the ECU.

It is recommended to use the DB15 - PIN cable.

The connector has the following connection scheme:

• 1 BOOT brown
• 2 VPP purple 1 piece
• 3 GPT2
• 4 CNF1 blue
• 5 VECU +12V red 4 pieces
• 6 J1850 L
• 7 CAN-H white
• 9 VKEY orange 4 pieces
• 10 BOOT gray
• 11 GND black 2 pieces
• 12 GPT1
• 13 J1850 H
• 14 K-LINE yellow
• 15 CAN-L green

To ensure error-free connection, the cable is additionally marked:

• gray BOOT wire, supplying 0 Volts, equipped with a black crocodile clip
• brown RESET wire, supplying 0 Volts, equipped with a black crocodile clip
• Blue CNF1 wire, supplying +3.3 Volts equipped with a red alligator clip