Renault Siemens EMS3150 BitEdit module

Module for calibrating firmware of Siemens EMS3150 control units for Renault / Dacia turbocharged petrol cars.

The module contains a set of maps sufficient for creating modified files for any level of modification (Stage 1-3).

Available for modification:

• Turbo control: PWM turbo control valve, boost and air mass flow limitation, torque threshold for turbo control regulation
• Engine speed limitation (rev limiter)
• Throttle control: specified throttle positions in D and P/N positions, throttle control when the air conditioner is turned on
• Injection timing: start of first injection for hot and cold engine, end of second injection for both modes
• Detonation: detonation recognition coefficients, detonation sensor correction
• Fuel mixture composition: closed/open loop mode switching, specified enrichment coefficient for closed/open loop in four engine modes
• Torque: maximum indicated torque, maximum effective torque, torque for transmission, request for effective torque, indicated torque based on intake pressure, torque losses, torque corrections
• Ignition: optimal angles, maximum angle with camshaft consideration, preventive detonation correction, angle efficiency
• Fuel system pressure
• VVT: intake and exhaust camshaft phase
• Error mask

To use the module, you need to purchase a BitEdit USB protection key . The key can be purchased in our store. You can purchase an unlimited number of modules for one key.

Description updates for new software versions within the module are free.

Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours). 

Module activation requires ONLY the serial number of the key and email.