-
From July 3 to July 17 (inclusive) the PCMflash developer will be on vacation. Activations will be delayed. Delays of up to a day are possible
- PCMflash Support
Software module to work through a diagnostic connector with a Delphi DCM7.1AP ECU, installed on cars for the Indian market (Ashok Leyland, Eicher, Force Motors, Kia/Hyundai, Tata). It supports reading, writing, as well as checking and correcting CS..
To use the module, you need to purchase a USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
The module 93 PCM FLASH is designed for the following vehicles and control units:
- Ashok Leyland TD (DCM2.5) [RD/WR/CK]
- Ashok Leyland 1.5L TD (DCM7.1AP) [RD/WR/CK]
- Ashok Leyland LCV TD (DCM7.1AP) [RD/WR/CK]
- Eicher E366/E474 2.0L, 3.0L TD (DCM7.1AP) [RD/WR/CK]
- Force 2.6L TD (DCM2.7AP) [RD/WR/CK]
- Force 2.6L TD EEPROM (DCM2.7AP) [RD/WR/CK]
- Force Motors 2.6L TD (DCM7.1AP) [RD/WR/CK]
- Kia/Hyundai 1.6L TD (DCM7.1AP) [RD/WR/CK]
- Mahindra TD (DCM2.5) [RD/WR/CK]
- Mahindra 1.6L TD (DCM2.7AP) [RD/WR/CK]
- Mahindra 1.6L TD EEPROM (DCM2.7AP) [Bench] [RD/WR]
- Mahindra 1.5L TD (DCM7.1AP) [RD/WR/CK]
- Mahindra 1.5L TD EEPROM (DCM7.1AP) [Boot] [RD/WR]
- Tata TD (DCM2.5/DCM2.5P) [RD/WR/CK]
- Tata 1.5L TD (DCM7.1AP) [RD/WR/CK]
- Tata LCV TD (DCM7.1AP) [RD/WR/CK]
- Tata Truck TD (DCM7.24) [RD/WR/CK]
VR - virtual reading, RD - reading, WR - writing , CK - verification and checksum correction, NC - checksum not used.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, etc.). You can buy J2534 adapter in our store.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
