Software module for working with Bosch MG1/MD1 engine control units in bootloader (BSM) mode without disassembling the control unit. . Work is only possible with ECUs with the old protection system (the implementation of the new one began in mid-2020)
To use the module, you need to purchase a USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
The module 92 PCM FLASH is designed for the following cars and control units:
- MD1/MG1 FLASH (SPC572L/SPC574K/SPC5777M/SPC58/TC275TP/TC277TP/TC298TP/TC299TP/TC387QP/TC399XP) [RD/WR/CK]
- MD1/MG1 EEPROM (SPC572L/SPC574K/SPC5777M/SPC58/TC275TP/TC277TP/TC298TP/TC299TP/TC387QP/TC399XP) [RD/WR]
- MG1UA008/MG1US008 FLASH (SPC574K/TC277TP) [RD/WR/CK]
- MG1UA008/MG1US008 EEPROM (SPC574K/TC277TP) [RD/WR/CK]
VR - virtual reading, RD - reading, WR - writing , CK - verification and checksum correction, NC - checksum not used.
ATTENTION! This module only supports working with control units on the bench.
For operation, the Scanmatik 2 or Scanmatik 2 PRO adapter is required. Dialink is partially supported
To connect the control unit on the bench, additional equipment is required, any of the following:
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.