Module for calibrating firmware of Hitachi Gen2 control units for Nissan petrol turbocharged and naturally aspirated cars.
MCU Renesas SH72533 files with a size of 2.0 MB are supported.
Available for modification:
Control of turbocharger PID controller sensitivity, turbocharger degree correction, specified turbocharger, turbocharger limit, injection timing correction, mixture composition conversion to enrichment (main mixture calculation) for normal and stratified injection modes, injection phase, fuel pressure, pedal position conversion to QH0, injector compensation, RPM limit, as well as launch-assist for manual transmission, ignition timing angles, both basic and optimal, QH0 conversion to torque, specified drive force, variable valve timing control (VVT), and speed limiter (if found).
Module requires the purchase of USB protection key BitEdit. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Description updates for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required for module activation.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
