Module for calibrating firmware of Hitachi Gen1 control units based on Renesas SH7058 processor, used for Nissan/Infiniti petrol atmospheric vehicles.
Supported file size - 1 MB.
Available for modification:
Basic and additional maps for calculating the intake air fraction, fuel delivery in regulation mode and basic mixture composition, intake camshaft phase, fuel delivery compensation in mixture, calibration of the throttle valve, QH0 bases, main throttle valve adjustment, sensitivity of knock sensors, ignition angle trimming, engine torque, QH0 to torque conversion, drive force, adaptation during slow driving, as well as rev limit and error mask.
To use the module, you need to purchase a BitEdit USB protection key . The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Description updates for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
For module activation, ONLY the serial number of the key and email are required.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
