Module for calibrating firmware of Mitsubishi control units for Mazda petrol vehicles with SkyActiv-G engines with a volume of 1.3, 1.5, 2.0, 2.5 liters.
Supported file formats: M04, M05, M09 with a size of 2.0 MB.
Available for modification:
Fuel injection rail pressure, calculated intake air temperature, intake and exhaust camshaft phase, enrichment in regulation and power modes, throttle pedal position threshold for transitioning to power mode, throttle position request, load limitation, torque request at partial and full loads, engine speed XX, maximum engine speed XX, engine speed XX in catalyst purging mode, minimum ignition advance angle, base angle for high/low octane fuel, injection angle, engine speed limitation, vehicle speed limitation (only if found, SPECIFY CUT-OFF/RECOVERY SPEED), error mask.
Urgent requests are not available for this module.
To use the module, you need to purchase a USB protection key BitEdit. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Description updates for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
