Hurry to buy Promotion ends left
-
Discounts for module payments:
- 2–3 modules — extra 5% discount (use coupon BIT25_15)
- 4+ modules — extra 10% discount (use coupon BIT25_20)
Module for calibrating firmware of Transtron control units with Infineon Aurix processors for Isuzu and Mazda diesel vehicles with 3.0TD 4JJ3 engines.
Available for modification:
Turbo pressure: Boost limit for atmospheric pressure correction, Boost limit for intake air temperature, Boost pressure in additional mode, Maximum boost limit, Maximum turbo position limit, Turbo position in additional mode
DPF: DPF boost pressure in additional mode, Turbo DPF position in additional mode
EGR: EGR position in additional mode, Target EGR position, Intake throttle position in additional mode, Maximum exhaust gas recirculation position, Injection quantity position
Injection: Injector lift time, Injector lift time conversion
Limiters: Torque limit conversion, Boost injection quantity limit, Injection quantity limit, Intake air temperature, Injection quantity limit based on mass air flow, Lower injection quantity limit, Torque limit for atmospheric pressure correction, Torque limit for clutch engagement, Torque limit for coolant temperature, Torque limit based on coolant temperature, Torque limit based on exhaust gas temperature, Torque limit based on fuel temperature, Torque limit for transmission, Torque limit based on intake air temperature, Torque limit based on intermediate cooler temperature, Torque limit based on intermediate cooler temperature out, Torque limit based on quantity, Torque limit based on speed, Vehicle speed limit
Mass air flow temperature: Coolant temperature sensor voltage, Fuel temperature sensor voltage, Intake air temperature sensor voltage, Mass air flow in additional mode, Mass air flow sensor voltage
Rail pressure: Fuel rail pressure, Maximum fuel rail pressure limit, Start of fuel rail pressure
Start of injection: Start of injection in additional mode
Torque control: Accelerator pedal position conversion, Accelerator torque position
Error code mask
To use the module, you need to purchase a BitEdit USB protection key BitEdit. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the key and email are required.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
