Module for calibrating control systems of Chrysler/Dodge/Jeep petrol engines with Motorola NGC4 control units based on MPC5554 processor with 2MB internal flash memory.
Available for modification:
Volumetric efficiency, its corrections and multipliers, calculation of mass air flow during start-up, air mass limiters, lambda regulation, XX control in different modes, fuel injector control, PWM corrections, PWM constant for injectors, power request by pedal, ignition timing angle at partial and full load, optimal angle, angle corrections based on temperature, angle during VVT activation, angle limiters, knock angle rebounds, throttle control, intake and exhaust camshaft phase for VVT, idle and P/N position rev limiters, speed limiter (if found). Error mask is also available for editing.
To use the module, the purchase of a BitEdit USB protection key is required. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Description updates for new software versions within the module are free.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required for module activation.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.