ECULite USB key

ECULite USB key

ECULite USB key $44

ECULite USB key

ECULite USB key

Popular

In stock Product code: eculite

ECULite Brand

$44

Price in reward points: 44

Shipping Information

Enter a delivery address

Country

Region / State

Post Code

City

Description

Key protection for ECULite flasher from Boevsoft developer.

Attention! The key is not sold without a module! You must add at least one module to your order. Orders without module will be cancelled. The money transfer fee may be lost.

USB key SenseLock EL-Genii for protecting ECULite programs from hacking. Without the key, the programs cannot be launched or used.

ECULite flasher is modern software for editing calibrations of foreign cars. This program allows you to change the firmware settings of cars for chip tuning.

Main functions (calibrations) of ECULite:

Ignition timing angle (ITA)
Error detection mask related to catalytic converter malfunction (extended error mask available for Denso)
Exhaust gas recirculation valves (EGR)
Oxygen sensor
Throttle valve characteristic tables
Optimal torque table
Torque request
For diesel systems: boost pressure maps, torque request, injection start phase, injection time, fuel pressure, EGR valve table, error detection mask, etc.
Number of calibrations (depends on the map) from 30 to 80

Features:

User-friendly interface with the ability to display calibrations in tables, 3D and 2D graphs
Display of error mask and calibration constants
Comparison function of two firmware versions with the ability to copy calibrations from the compared file
Editing calibrations, setting absolute values and making changes in percentage
Modular structure of calibration description maps
Electronic software protection key

ECULite program has a modular structure, which means that to edit a specific type of firmware, you need to purchase the necessary module.

You can buy ECULite modules from us.

Modules

Related Products

Module 27. China Truck Cummins CM2880 (ECULite)

In stock Module 27. China Truck Cummins CM2880 (ECULite)

$373

Please select required options

In Stock
Module 1. Toyota Denso 3.5 (ECULite)

$45

Software module ECULite for editing calibrations of Toyota/Lexus 3.5l vehicles. The module allows editing firmware of Toyota Camry, Highlander, and Lexus vehicles with 3.5l petrol engines with Denso control units, without checksum correction. To use the module, you need to purchase the ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. Only the serial number of the key is required for module activation.
In Stock
Module 2. Toyota Denso 2.4 (ECULite)

$45

Software module ECULite for editing calibrations of Toyota 2.4l cars. The module allows editing firmware of Toyota Camry, Rav4 cars with 2.4l petrol engines 2AZ-FE with Denso control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 3. Toyota Denso 2.0 (ECULite)

$45

ECULite software module for editing calibrations of Toyota 2.0l cars. The module allows editing firmware of Toyota Camry, Rav4, Avensis cars with 1AZ-FE, 3ZRF-AE, 3ZRF-BE, 3ZR-FE petrol engines, with Denso control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 4. Toyota Denso 1.6 (ECULite)

$45

Software module ECULite for editing calibrations of Toyota 1.6l cars. The module allows editing firmware of Toyota Corolla cars with 1.6l petrol engines 1ZR-FE, 3ZZFE with Denso control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 5. Mitsubishi Melco 3 (ECULite)

$45

ECULite software module for editing calibrations of Mitsubishi 1.3l, 1.6l, 2.0l, 2.4l vehicles. Module for editing firmware of Mitsubishi Lancer 9, Mitsubishi Outlander 3Gen with 4G13, 4G18, 4G63, 4G64 petrol engines with a volume of 1.3l, 1.6l, 2.0l, 2.4l with Melco 3 control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 6. Toyota Denso 2.8D (ECULite)

$45

Software module ECULite for editing calibrations of Toyota Land Cruiser 150 vehicles. The module allows editing firmware of Toyota Land Cruiser 150 vehicles with 1GDFTV diesel engine and Denso control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 7. Volkswagen Bosch EDC16U1 (31/34) 1.9 TDI PD (ECULite)

$45

Software module ECULite for editing calibrations of Volkswagen cars with Bosch EDC16U1 (31/34) 1.9 TDI PD ECU. Module for editing firmware of VW Touran, Golf, Passat, Transporter, Caddy cars with AVQ, BKC, BMT, BLS engines, etc., with a capacity of 1.9L, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 8. Toyota Denso 1.8 (ECULite)

$45

Software module ECULite for editing calibrations of Toyota 1.8L cars. The module allows editing firmware of Toyota Avensis cars with 2ZR-FAE petrol engines, 1.8L volume, with Denso control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 9. Toyota Denso 2.5 (ECULite)

$45

Software module ECULite for editing calibrations of Toyota 2.5l cars. The module allows you to edit firmware of Toyota Camry cars with 2AR-FE engine, 2.5L volume, with Denso control units, without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 10. Toyota Denso DTC (ECULite)

$45

Software module ECULite for editing calibrations of Toyota cars. The module allows you to edit and compare error masks on a large number (about 1000) of Denso software and allows not only to disable, but also to enable the DTC error code without adjusting the checksums. To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 11. Subaru Denso 2.0 (ECULite)

$45

ECULite software module for editing calibrations of SUBARU 2.0l cars. The module allows editing firmware of SUBARU cars (2.0L engines) with Denso MCU SH7055/SH7058 control unit (file sizes 512Kb and 1Mb) without checksum correction. Available tables for ignition timing, mixture composition, throttle position, torque request, error mask, etc. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 12. Subaru Denso DTC (ECULite)

$45

ECULite software module for editing SUBARU car calibrations. The module is designed for building, editing, and comparing an extended error mask according to the OBD/SAE standard for SUBARU car firmware with Denso MCU SH7055/SH7058 control unit (file sizes 512Kb and 1Mb). It allows not only disabling but also enabling the DTC error code without checksum correction. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 13. KMZ EDC7UC31 DTC (ECULite)

$45

Software module ECULite for editing calibrations of KAMAZ trucks. The module allows displaying, editing, and comparing the error mask of KAMAZ vehicles with the Bosch EDC7UC31 ECU, without checksum correction. Main functions: Displaying error codes according to OBD/SAE standard (P Code), SPN, Customer code, KTS code Error mask comparison mode with the ability to display values in the compared file Searching for error code by OBD code, SPN, Customer code, KTS code, description match Displaying extended firmware identifiers Reading and writing firmware is recommended to be done using the Combiloader programmer. Before writing, Combiloader will automatically correct the checksums (CS). To use the module, the purchase of a ECULite USB protection key is required. The key can be purchased in our store. An unlimited number of modules can be purchased for one key. Description updates for new software versions within the module are free. Module activation is performed within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 14. GAZ EDC17CV44/54 (ECULite)

$149

Software module ECULite for editing calibrations of GAZ, PAZ vehicles with the YAMZ 53xx engine. The module allows you to view, compare, and edit firmware files of GAZ, PAZ vehicles with the YAMZ 53xx engine, ECU EDC17CV44/54, without checksum correction. Calibrations available for editing: Turbocharger pressure Fuel pressure Fuel delivery Fuel delivery corrections Injection timing Torque request and limit Sensor calibration Speed limit DTC error mask Over 100 calibrations are supported depending on the software version For reading and writing firmware, it is recommended to use the Combiloader programmer, which automatically corrects checksums before writing the file to the ECU. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Description updates for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 15. KMZ MR PLD 24C DTC (ECULite)

$120

Software module ECULite for editing calibrations of KAMAZ trucks with Mercedes engines. The module allows you to view, edit, and compare DTC error codes of KAMAZ vehicles with Mercedes engine and MR PLD SW 24C control unit, without checksum correction. Main functions: Decoding error codes according to the manufacturer's standard Possible search for fault code by error number, full code decoding, or any match in the decoding Viewing extended firmware IDs To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 16. GAZ Cummins CM22xx (ECULite)

$224

Software module ECULite for editing calibrations of GAZ vehicles with Cummins engine. The module allows you to view, edit, and compare firmware files of GAZ vehicles with Cummins ISF2.8, ISF3.8 engines and Continental CM2220 control units, with checksum correction. Opening and editing firmware files is possible ONLY in *.bin format. The module contains over 2000 main calibrations. Reading and writing firmware to the control unit is recommended to be done using the Combiloader programmer. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Description updates for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 17. KMZ Cummins CM2xxx 4.5-6.7 (ECULite)

$224

ECULite software module for editing calibrations of KAMAZ vehicles with Cummins engines. The module allows you to view, edit, and compare firmware files of KAMAZ vehicles with Cummins engines, volume 4.5l and 6.7l, and control units Continental CM2150, CM2200, CM2880, with checksum correction. Opening and editing firmware files is possible ONLY in *.bin format. The module contains over 2000 main calibrations. Reading and writing firmware to the control unit is recommended to be done using the Combiloader programmer. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 18. KMZ Cummins CM2xxx 8.9 (ECULite)

$224

ECULite software module for editing calibrations of KAMAZ vehicles with Cummins engines. The module allows you to view, edit, and compare firmware files of KAMAZ vehicles with Cummins 8.9l engines and Continental CM2150, CM2200, CM2880 control units, with checksum correction. Opening and editing firmware files is ONLY possible in *.bin format. The module contains over 2000 main calibrations. Reading and writing firmware to the control unit is recommended to be done using the Combiloader programmer. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 19. Cummins CFG Statistic Editor (ECULite)

$269

ECULite software module for editing calibrations of Cummins engine vehicles. The module allows you to view and edit statistics data (mileage, fuel consumption), speed limit, and transmission protection parameters in configuration files *.cfg for ECU Continental CM2150, CM2200, CM2220, CM2350, CM2880. It is possible to open files of ANY agricultural, construction, and road machinery with Cummins engines, the most important condition is the ability to read and write configuration file *.cfg using Combiloader. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 20. Mercedes MR PLD (ECULite)

$747

Software module ECULite for editing calibrations of Mercedes engine vehicles with MR PLD control unit. The module allows you to view, edit, and compare firmware files of Mercedes-Benz trucks: Actros, Axor, Kamaz, MAZ, BharatBenz, ROPA agricultural machinery, as well as any other machinery with Mercedes engine and MR PLD control unit, without adjusting checksums. Supported MR PLD board versions: Type A5 (MCU C167CR) Type A6 (MCU C167CR) Type A7 (MCU XC2287) Main functions: Automatic SCR/AdBlue system shutdown Automatic patch for "4058 The data record in control module MR engine control has been manipulated" error Decoding of error codes according to the manufacturer's standard Possible search for fault code by error number, full code decoding, or any match in the decoding Viewing of extended firmware IDs Engine torque limitation table available The module language is English. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Description updates for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 21. MAN EDC17CV42 (ECULite)

$747

Software module ECULite for editing calibrations of MAN vehicles with Bosch ECU. The module allows you to view, compare, and edit firmware files of MAN vehicles with ECU Bosch EDC17CV42, as well as for Willibald special equipment with a MAN engine installed, without checksum correction. Calibrations available for editing: Boost pressure Fuel pressure Fuel delivery Fuel delivery corrections Injection timing Torque request and limit Sensor calibrations DTC error mask To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Description updates for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 22. China Truck EDC17CV44 (ECULite)

$373

Software module ECULite for editing calibrations of Chinese trucks. The module allows you to view, compare, and edit firmware files of FAW, Shacman, MAZ, Yutong, etc. vehicles with Weichai WP7, WP10, WP12 engines. It also supports firmware for CAMC, HOWO, Sinotruk, Hongyan, Dongfeng trucks with Bosch EDC17CV44 control units, without checksum correction. Calibrations available for editing: Turbocharger pressure Cruise control PTO Cooling system fan control Fuel pressure Fuel delivery Fuel delivery corrections Injection timing Torque request and limit DPF, EGR, AdBlue Sensor calibrations Idle speed Speed limiter DTC error mask A total of over 200 calibrations are supported depending on the software version. Reading and writing firmware to the control unit is recommended to be done using the Combiloader programmer. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 23. KMZ MD1CE100 (ECULite)

$747

Software module ECULite for editing calibrations of KAMAZ K5 trucks with R6 engine. Module KMZ MD1CE100 allows viewing, comparing and editing firmware files of Kamaz K5 vehicles with R6 engine (ECU Bosch MD1CE100), without checksum correction. Calibrations available for editing: Boost pressure Fuel pressure Fuel delivery Fuel delivery corrections Injection timing Torque request and limit DPF, EGR, AdBlue Sensor calibrations Idle speed Speed limiter DTC error mask A total of more than 150 calibrations are supported depending on the software version. Reading and writing firmware to the control unit is recommended to be done using the BitBox programmer. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. An unlimited number of modules can be purchased for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 24. Ford EDC17CV41 (ECULite)

$447

ECULite software module for editing Ford car calibrations. The module allows you to view, compare, and edit firmware files for Ford Cargo F-Max vehicles (ECU Bosch EDC17CV41) without checksum correction. Calibrations available for editing: Boost pressure Fuel pressure Fuel delivery Fuel delivery corrections Injection timing Torque limits AdBlue AdBlue fluid level Sensor calibrations Idle speed DTC error mask A total of over 150 calibrations are supported depending on the software version. Firmware format is open *.bin. Reading and writing firmware to the control unit is recommended using the Combiloader programmer and Bosch MEDC17 BSM module. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. An unlimited number of modules can be purchased for one key. Description updates for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. Only the serial number of the key is required for module activation.
In Stock
Module 25. KMZ JAC Cummins 38 CM2220 (ECULite)

$447

ECULite software module for editing calibrations of KAMAZ, JAC, Foton vehicles with Cummins engines. The module allows you to view, edit, and compare firmware files of KAMAZ, JAC, Foton vehicles with Cummins 3.8L engine and Continental CM2220 control unit, with checksum correction. Opening and editing firmware files is ONLY possible in *.bin format. The module contains over 1000 main calibrations. Reading and writing firmware to the control unit is recommended to be done using the Combiloader programmer. To use the module, the purchase of a ECULite USB protection key is required. The key can be purchased in our store. An unlimited number of modules can be purchased for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 26. MAN MD1CE100 (ECULite)

$747

Software module ECULite for editing calibrations of MAN vehicles with Bosch control unit. The module allows you to view, edit, and compare firmware files of MAN vehicles with Bosch MD1CE100 control unit, without checksum correction. Opening and editing firmware files is ONLY possible in *.bin format. The module contains over 200 main calibrations. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 27. China Truck Cummins CM2880 (ECULite)

$373

ECULite software module for editing calibrations of Chinese Foton and JAC trucks with Cummins engine and Continental CM2880 control unit. The module allows you to view, edit, and compare firmware files of Foton and JAC trucks with Cummins engine and Continental CM2880 control unit, which were read using Combiloader. Opening and editing firmware files is ONLY possible in *.bin format. The module contains over 1000 main calibrations. Available calibrations include torque request, injection quantity, injection timing, fuel pressure, emergency modes, starting calibrations, AdBlue/SCR, DTC error mask, and more. The module corrects the checksums in the firmware. Reading and writing firmware to the ECU is recommended using the Combiloader programmer. The calibration names in the module are Cummins abbreviations in English. The purpose of each calibration can be understood from its abbreviation. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 28. China Truck Cummins CM2150 (ECULite)

$373

ECULite software module for editing calibrations for Foton, JAC, FAW, DongFeng trucks with a Cummins engines and ECM Continental CM2150. The module allows you to view, edit, and compare firmware files for Foton, JAC, FAW, DongFeng trucks with Cummins engines and ECM Continental CM2150, which were read using Combiloader. Opening and editing firmware files is ONLY possible in *.bin format. The module contains over 1000 main calibrations. Available calibrations include torque request, injection quantity, injection phase, fuel pressure, emergency modes, start-up calibrations, SCR calibrations, DTC error mask and more. The module corrects the checksums in the firmware. Reading and writing firmware to the ECU is recommended using the Combiloader programmer. The calibration names in the module are Cummins abbreviations in English. The purpose of each calibration can be understood from its abbreviation. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 29. China Truck Wise 15C (ECULite)

$373

ECULite software module for editing calibrations of Chinese FAW, Shacman, MAZ, Yutong, etc. trucks with Weichai engine with a Wise15/Wise15C control unit. The module allows you to view, compare and edit firmware files of FAW, Shacman, MAZ, Yutong, etc. trucks Weichai engine with a Wise15/Wise15C control unit, which were read using Combiloader. Opening and editing firmware files is ONLY possible in *.bin format. In total, more than 200 calibrations are supported, depending on the software version. The calibration names in the module are Cummins abbreviations in English. The purpose of each calibration can be understood from its abbreviation. The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the Combiloader programmer. This programmer automatically corrects the CS when writing the firmware file. IMPORTANT, in Wise15C control units, the memory area consists of a calibration area and a configuration area. In the ECULite module calibration maps, parameters from both the calibration area and the configuration area are available, so it is recommended to write the configuration immediately after writing the calibrations. The writing procedure is described in detail in the help for the Combiloader programmer. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 30. China Truck Cummins CM2220 (ECULite)

$373

ECULite software module for editing calibrations of Chinese Foton, JAC, FAW trucks with Cummins engines and ECM Continental CM2220 control unit. The module allows you to view, edit, and compare firmware files of Foton, JAC, FAW trucks with Cummins engines and ECM Continental CM2220 control unit, which were read using Combiloader. Opening and editing firmware files is ONLY possible in *.bin format. The module contains over 1000 main calibrations. Available calibrations include torque request, injection quantity, injection timing, fuel pressure, emergency modes, starting calibrations, AdBlue/SCR, DTC error mask, and more. The module corrects the checksums in the firmware. Reading and writing firmware to the ECU is recommended using the Combiloader programmer. The calibration names in the module are Cummins abbreviations in English. The purpose of each calibration can be understood from its abbreviation. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 31. Mercedes MCM 2/2.1 (ECULite)

$747

ECULite software module for editing calibrations of trucks and agricultural machinery with the Mercedes engine and the ECU Continental MCM2 and MCM2.1. The module allows you to view, edit, and compare firmware files of trucks and agricultural machinery with the Mercedes engine and the ECU Continental MCM2 and MCM2.1. Available Parameters: DTC error mask; Torque limits; Fueling; Idle speed control; Sensors. The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the AutoVEI TruckExplorer programmer. This programmer automatically corrects the CS when writing the firmware file.. The calibration names in the module in English. To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 32. China Truck MD1CE868 (ECULite)

$373

Software module ECULite for сhina Truck MD1CE868 module allows you to view, compare and edit firmware files for Sitrak Bosch MD1CE868 vehicles. The following calibrations are available for editing: boost pressure, fuel pressure, fuel supply, fuel supply correction, injection phase, torque request and limit, AdBlue, sensor calibration, idle speed, speed limiter, DTC error mask. In total, more than 120 calibrations are supported, depending on the software version. The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the Combiloader programmer. This programmer automatically adjusts the CS when writing the firmware file. Functions and capabilities: Disabling SCR/Adblue - manually. Raising power. Change idling. Changing the speed limit. To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 33. China Truck Wise 10 (ECULite)

$523

The 33 China Truck Wise 10 module allows you to view, compare and edit ECU files for Sitrak, Shacman, MAZ, etc. vehicles with a diesel engine and a Wise 10 control unit. In total, more than 200 calibrations are supported, depending on the software version. The module does not correct CS checksums. It is recommended to read and write file to the ECU using the Bitbox programmer. This programmer automatically corrects the CS when writing the file. Functions and features: DTC error mask. Engine power tuning. Disabling SCR/Adblue – manual mode. Disabling the DPF/Soot filter – manual mode. Setting the AdBlue level. Changing the idle speed. Changing the vehicle speed limit. Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 34. China Truck Wise 13 (ECULite)

$373

Module 34 China Truck Wise 13 allows you to view, compare and edit firmware files for Sitrak, Shacman, MAZ, etc. vehicles. with diesel engine and Wise 13 control unit. In total, more than 200 calibrations are supported, depending on the software version. The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the Combiloader programmer. This programmer automatically adjusts the CS when writing the firmware file. Functions and features: TC error mask. Raising power. Disabling SCR/Adblue - manually. Disabling DPF/Soot filter - in manual mode. Setting the AdBlue level. Change in speed XX. Changing the speed limit. Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 35. China Truck MD1CE100 (ECULite)

$373

Module 35 China Truck MD1CE100 allows you to view, compare and edit firmware files for Sitrak, Shacman, MAZ, etc. vehicles. with diesel engine and Bosch MD1CE100 control unit. In total, more than 200 calibrations are supported, depending on the software version. The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the Combiloader programmer. This programmer automatically adjusts the CS when writing the firmware file. Functions and capabilities: DTC error mask. Raising power. Disabling SCR/Adblue - manually. Disabling DPF/Soot filter - in manual mode. Setting the AdBlue level. Change in speed XX. Changing the speed limit. Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 36. JAC EDC17C81 (ECULite)

$373

Module 36 JAC EDC17C81 allows you to view, compare and edit firmware files for JAC cars (N56, N72, Sunray), as well as cars created on the basis of the model data (Sollers Atlant, Sollers Argo, MAZ 281040) with a diesel engine and a Bosch EDC17C81 control unit. In total, more than 200 calibrations are supported, depending on the software version. The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the Combiloader programmer, Bosch MEDC17 BSM J2534 module. This programmer automatically adjusts the CS when writing the firmware file. Functions and capabilities: DTC error mask. Raising power. Disabling SCR/Adblue - manually. Disabling DPF/Soot filter - in manual mode. Setting the AdBlue level. Change in speed XX. Changing the speed limit Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 37. China Truck Cummins CM2670 (ECULite)

$523

Module 37 China Truck Cummins CM2670 allows you to view, edit, compare firmware files of Dongfeng cars with a Cummins engine and a Continental CM2670 control unit. It is possible to open and edit firmware files ONLY in *.bin format, read using Combiloader. The module contains more than 1000 main calibrations. The module corrects the checksums of the KS when saving firmware.. Functions and capabilities: DTC error mask. Power boost. Disabling SCR / Adblue - in manual mode. Disabling DPF / Soot filter - in manual mode. Setting the AdBlue level. Changing the idle speed. Changing the speed limit. Turning on / off the power take-off shaft (PTO) Turning on / off the air conditioner (AC) Turning on / off the cruise control (CC) Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 38. China Truck Cummins CM876 (ECULite)

$447

Module 38 China Truck Cummins CM876 allows you to view, edit, compare firmware files of Shacman vehicles with a Cummins engine and a Continental CM876 control unit. It is possible to open and edit firmware files ONLY in *.bin format, read using Combiloader. The module contains more than 1000 main calibrations. The module corrects the checksums of the KS when saving firmware. Functions and capabilities: DTC error mask. Power boost. Disabling SCR / Adblue - in manual mode. Setting the AdBlue level. Changing the idle speed. Changing the speed limit. Turning on / off the power take-off shaft (PTO) Turning on / off the air conditioner (AC) Turning on / off the cruise control (CC) Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 39. IVECO MD1CE101 (ECULite)

$747

Module 39 IVECO MD1CE101 allows you to view, edit, compare firmware files for IVECO vehicles with a diesel engine and a Bosch MD1CE101 control unit. It is possible to open and edit firmware files ONLY in the *.bin format, read using Dimsport New Genius. The module does not correct the checksums of the KS when saving firmware. It is recommended to write firmware using the Dimsport New Genius programmer, Trasdata these programmers correct the checksums of the KS automatically before writing. Functions and capabilities: Functions and capabilities: DTC error mask. Power increase. Disabling SCR / Adblue - in manual mode. Disabling DPF / Soot filter - in manual mode. Setting the AdBlue level. Changing the idle speed. Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.
In Stock
Module 40. China Truck Continental SID605 (ECULite)

$447

Module 40. China Truck Continental SID605 The Eculite firmware editor module is designed for working with firmware files of FAW vehicles (J7/J6/Tiger) equipped with diesel engines and Continental SID605 ECUs. It allows users to open, edit, and compare firmware in *.bin format created using Combiloader. The module offers more than 50 key calibrations for precise tuning. Key Features: DTC error masking. Engine power enhancement. Manual SCR/AdBlue deactivation. Manual EGR deactivation. AdBlue level adjustment. Idle speed adjustment. Speed limiter removal. Module language: Russian/English To work with the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key. Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays. To activate the module, ONLY the serial number of the key is required.

1

false

false

true

Remove

Change

tr

true