ECULite software module for editing calibrations of Chinese FAW, Shacman, MAZ, Yutong, etc. trucks with Weichai engine with a Wise15/Wise15C control unit.
The module allows you to view, compare and edit firmware files of FAW, Shacman, MAZ, Yutong, etc. trucks Weichai engine with a Wise15/Wise15C control unit, which were read using Combiloader.
Opening and editing firmware files is ONLY possible in *.bin format.
In total, more than 200 calibrations are supported, depending on the software version.
The calibration names in the module are Cummins abbreviations in English. The purpose of each calibration can be understood from its abbreviation.
The module does not correct CS checksums. It is recommended to read and write firmware to the ECU using the Combiloader programmer. This programmer automatically corrects the CS when writing the firmware file.
IMPORTANT, in Wise15C control units, the memory area consists of a calibration area and a configuration area. In the ECULite module calibration maps, parameters from both the calibration area and the configuration area are available, so it is recommended to write the configuration immediately after writing the calibrations.
The writing procedure is described in detail in the help for the Combiloader programmer.
To use the module, you need to purchase a ECULite USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules with one key.
Updates of descriptions for new software versions within the module are free. Module activation is done within 1 hour on business days. Activation may be delayed on weekends and holidays.
To activate the module, ONLY the serial number of the key is required.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.