Module for editing control unit firmware Bosch MED17.8.10 for Chinese petrol cars.
Available for modification:
Air supply control: mass air flow through the throttle body base, boost pressure limitation by intake temperature, throttle position from accelerator pedal, throttle position from mass air flow
Boost control: turbocharger efficiency, isobaric heating process for the charging device
Exhaust gas temperature: exhaust gas temperature, lambda correction by exhaust gas temperature
Idle control: desired idle speed in additional mode
Injector control: injection timing correction
Detonation control: detonation retard step for ignition advance, detonation sensor sensitivity coefficient, retard recovery
Ignition advance: ignition angle characteristic map for detonation correction, optimal ignition advance, additional ignition advance mode, lambda-based ignition advance correction
Target lambda value: Component protection extension, Minimum target lambda value for component protection, Required torque threshold for full load detection, Target lambda value for component protection
Torque model: Resistance torque loss, Delta ignition angle efficiency, Ignition angle efficiency depending on delta angle, Normal torque limit mode indication, Sport torque limit mode indication, Minimum specified efficiency, Optimal specified torque, Target air filling calculated by specified torque
Torque request: Inverted pedal position in additional mode
VVT: Exhaust camshaft position, Intake camshaft position
Warm-up: Lambda efficiency, Throttle temperature coefficient, Warm-up correction for combustion, Combustion weight coefficient for intake temperature and coolant temperature,
Error code mask
To use the module, you need to purchase a USB protection key BitEdit. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
For module activation, ONLY the serial number of the key and email are required.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
