Module for calibrating firmware of Bosch EDC17CP09 control units for BMW diesel cars.
File size up to 4 MB is supported.
Available for modification:
Air mass: desired air mass flow rate with and without exhaust gas recirculation system, maximum air mass flow rate, air mass correction
Turbocharger control: basic boost controller duty cycle, in regeneration mode, in dual injection mode, with exhaust gas recirculation system disabled, maximum boost controller duty cycle
Turbocharger pressure: turbocharger pressure limit, desired base turbocharger pressure, in regeneration mode, in dual injection mode, with EGR disabled, with bypass closed
DPF: DPF enable/disable, regeneration search masks, exhaust gas sensor scaling and test conditions.
EGR control: thresholds for EGR enable/disable
EGT sensors: EGT sensor scaling, switches and test conditions
Injection: injection quantity from torque conversion maps, injector opening time, post-injection quantity
Rail pressure: base rail pressure, at idle, rail pressure limiters, P, I components for flow regulator, injection flow regulator map, rail pressure regulator maps
Start: engine speed after start, starting torque, minimum engine speed
Injection start: base injection start angle for main injection, time component between Pi1 and Pi2
Target lambda for smoke limitation
Torque limitation: torque limitation, internal/external torque, powertrain torque, conditional torque limitation based on EGT, exhaust gas pressure, fuel temperature, torque limitation in case of system errors.
Torque control: torque limitation in monitoring mode, accelerator pedal for control
Required torque: required torque from accelerator pedal base, required torque correction factors based on coolant temperature and atmospheric pressure.
Error code mask editor
To use the module, you need to purchase a BitEdit USB protection key . The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required for module activation.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
