Script for decoding Bosch/Blaupunkt RCD 310/510 radios.
Script ONLY for iPROG PRO!
This script supports reading codes, SAFE reset, code change, and preparation of a replacement EEPROM file (if the original EEPROM is lost).
With this tool, you can decode RCD310 / RCD510 (Bosch/Blaupunkt), read codes, reset SAFE mode, change codes, and prepare a replacement EEPROM file in case the original EEPROM file is bad or lost.
Instructions for using the script:
1. Read the eeprom(95128) using any available programmer.
2. Connect iPROG PRO to the radio unit according to the diagram.
3. Supply external power (12v) to iPROG PRO and perform the NEC read.
4. Load the previously read eeprom(95128) file and retrieve the code.
5. Reset SAFE mode / Change code => Write EEPROM.
Open the program and click “Help” -> “About”.
Copy data from the program when placing an order
After completing the order, you will receive files, they must be added to the Scripts folder..
Launch the program and on the left side of the screen you will see the added scripts.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.