Hurry to buy Promotion ends left
-
Discounts for module payments:
- 2–3 modules — extra 5% discount (use coupon BIT25_15)
- 4+ modules — extra 10% discount (use coupon BIT25_20)
Module for calibrating firmware of Hitachi Gen1 control units for Nissan petrol turbocharged cars.
Supported MCU files Renesas SH7058/SH7059 with a size of 1.0, 1.5 MB.
Available for modification:
Set boost pressure, multiplier for boost limit and cut-off, calculation of boost release valve based on RPM and pressure, specified PWM for boost control valve, calculated catalyst temperature, fuel delivery in regulation mode, enrichment on partial and full loads, gain coefficient for oxygen sensors, injection compensation when throttle is opened, curves for: oxygen sensor, mass air flow sensor, throttle opening by pedal, calculation of QH0 base, low and high octane trimmings for ignition timing, base angle trimming, optimal low and high octane ignition timing, minimum ignition timing, knock sensor sensitivity, calculated engine torque, conversion of QH0 to torque, drive force, maximum and minimum force for drive, RPM limit and speed limit (if found). Error code mask.
Which cars are supported by Nissan Hitachi Petrol Turbo Gen1 BitEdit module:
- Juke 1.6T
- Tiida 1.6T
- GTR
The module requires the purchase of USB protection key BitEdit. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Description updates for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Module activation requires ONLY the serial number of the key and email.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
