The module supports firmware identification/reading/writing, conversion from dealer format VBF to BIN, error reading/deletion, checksum verification/recalculation of TCM Powershift 6DCT250 control unit for Ford Focus 3 cars.
What functions does the MMC FLASH module support:
- Calibration reading
- Calibration writing
- Identification
- Error reading/erasing
- Virtual reading
- Checksum recalculation
To use the module, you need a MMC Flash USB key and J2534 adapter.
To activate the module, only the serial number of the key is required.
Open the MMC flasher program, the key serial number is indicated in the lower right corner.
After activating the module you will receive an updated program, install the program
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.