The module supports firmware identification/reading/writing, conversion from dealer format VBF to BIN, reading/deleting errors, checking/recounting control checksum of TCM Powershift 6DCT250 control units for Ford Focus 3 cars.
What functions does the MMC FLASH module support:
- Reading calibrations
- Writing calibrations
- Identification
- Reading/erasing errors
- Virtual reading
- Recounting control checksum
To work with the module, you need a USB key MMC Flash and J2534 adapter.
To activate the module, only the serial number of the key is needed.
-
There are no reviews for this product.
-
No questions yet
Open the MMC flasher program, the key serial number is indicated in the lower right corner.
After activating the module you will receive an updated program, install the program
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.